Ex Michael Waltrip Racing ASA Roller for SCCA GTA or NASA SU
11-18-2012, 09:35 AM
#1
Drifting
Thread Starter
Ex Michael Waltrip Racing ASA Roller for SCCA GTA or NASA SU
Ex Michael Waltrip Racing ASA AC Delco Monte Carlo
Perimeter chassis with center section by Howe with Hamke clips. Easy conversion to road race for SCCA GTA, Crane Cams V8 StockCar, NASA SU, track days, etc.
Set up for LS1
* Wilwood 6 piston front calipers
* Winters quick change
* Sweet Rack
* ATL fuel cell
* guages
* fire system
* radiator
* full width Panhard bar, 3 link rear suspension
* 7 degree front spindles
* PFC front rotors
$ 4500 as roller
$ 1500 for body, chassis, guages only
contact "Bosco" Logsdon @ 386 717 0745
or bosco022022 at yahoo dot com
Perimeter chassis with center section by Howe with Hamke clips. Easy conversion to road race for SCCA GTA, Crane Cams V8 StockCar, NASA SU, track days, etc.
Set up for LS1
* Wilwood 6 piston front calipers
* Winters quick change
* Sweet Rack
* ATL fuel cell
* guages
* fire system
* radiator
* full width Panhard bar, 3 link rear suspension
* 7 degree front spindles
* PFC front rotors
$ 4500 as roller
$ 1500 for body, chassis, guages only
contact "Bosco" Logsdon @ 386 717 0745
or bosco022022 at yahoo dot com
Last edited by bosco022; 11-18-2012 at 09:37 AM.
11-19-2012, 06:20 AM
#3
Drifting
Thread Starter
11-19-2012, 09:17 AM
#7
Racer
11-19-2012, 09:23 AM
#8
Drifting
Thread Starter
This car is actually my old BEMCO built ASA/GTA racer. Now re-bodied as a Howe Camaro and owned by Squeak Kennedy. This car was bad fast at Daytona with the Monte body and a pretty mild carbureted LS1. 1:56.9 with Bobby Kennedy driving. It has won a number of races in V8 StockCar, SCCA SPO and GTA.
The one I have for sale is very similar. Same body....nearly identical chassis.
The one I have for sale is very similar. Same body....nearly identical chassis.
Last edited by bosco022; 11-19-2012 at 09:27 AM.