It time for a sale! Save 20%!
11-19-2012, 11:21 PM
#1
Supporting Vendor
Thread Starter
It time for a sale! Save 20%!
Happy Thanksgiving!
We are offering you 20% these useful products.
C5 and C6 Fangs! Reg. $49.99 Sale price $39.99
You know how venerable your front skid plates are and sooner or later you’re going to bump or scrape them.
Fangs provide the best possible front Skid Plate/Radiator support protection available and with no noticeable ground clearance loss.
So don’t wait till you scrape! It’s a small price to pay for such good protection!
http://www.saccitycorvette.com/Thank...Sale20Off.html
Go from this.
To this and be fully protected.
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
CoolIt v2 & v3 High Speed Fan Controller!
Reg. $99.99 Sale price $79.96
Now you can control your C5 Corvette's radiator high speed cooling fan with the simple push of a button allowing you to control your radiator coolant temperatures with a wireless FOB.
This makes it perfect for when you are at the track and you want to cool down between runs or keep cool in traffic. It will even help keep your Automatic Transmission running cooler too!
Simple 5 minute plug & play install. Cooler is better!
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
C5 CoolIt v2R & v3R High Speed Fan Controller!
Reg. $129.99 Sale price $103.99
In this sale, we are introducing the Race Version of the CoolIt.
It allows you to run your cooling fan with the ignition On or Off. This allows you to cool down quickly between drag races or in the pits.
If you have an Electric Water Pump, the Race CoolIt allows you to run your water pump and fan at the same time for real quick cool downs between runs for better ET’s!
Great for drag racers! It also allows for cooler running while driving in traffic and keeps your Automatic Transmission running cooler. Simple 5 minute plug & play install.
Cooler is better for performance and reliability!
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
We are offering you 20% these useful products.
C5 and C6 Fangs! Reg. $49.99 Sale price $39.99
You know how venerable your front skid plates are and sooner or later you’re going to bump or scrape them.
Fangs provide the best possible front Skid Plate/Radiator support protection available and with no noticeable ground clearance loss.
So don’t wait till you scrape! It’s a small price to pay for such good protection!
http://www.saccitycorvette.com/Thank...Sale20Off.html
Go from this.
To this and be fully protected.
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
CoolIt v2 & v3 High Speed Fan Controller!
Reg. $99.99 Sale price $79.96
Now you can control your C5 Corvette's radiator high speed cooling fan with the simple push of a button allowing you to control your radiator coolant temperatures with a wireless FOB.
This makes it perfect for when you are at the track and you want to cool down between runs or keep cool in traffic. It will even help keep your Automatic Transmission running cooler too!
Simple 5 minute plug & play install. Cooler is better!
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
C5 CoolIt v2R & v3R High Speed Fan Controller!
Reg. $129.99 Sale price $103.99
In this sale, we are introducing the Race Version of the CoolIt.
It allows you to run your cooling fan with the ignition On or Off. This allows you to cool down quickly between drag races or in the pits.
If you have an Electric Water Pump, the Race CoolIt allows you to run your water pump and fan at the same time for real quick cool downs between runs for better ET’s!
Great for drag racers! It also allows for cooler running while driving in traffic and keeps your Automatic Transmission running cooler. Simple 5 minute plug & play install.
Cooler is better for performance and reliability!
Read more here.
http://www.saccitycorvette.com/Thank...Sale20Off.html
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
11-20-2012, 12:25 AM
#2
Race Director
My car is lowered on stock bolts. I scrape in 2 spots just going in/out of my driveway plus everywhere else I go.
Right now I have the steel (add on) plates which work fine but sound like demons from hell every time I scrape.
I'm sure yours would be quiet, but honestly, I think I'd wear them thru in 2 or 3 weeks.
What (specific) plastic are they made of?
How long is the warranty?
Right now I have the steel (add on) plates which work fine but sound like demons from hell every time I scrape.
I'm sure yours would be quiet, but honestly, I think I'd wear them thru in 2 or 3 weeks.
What (specific) plastic are they made of?
How long is the warranty?
11-20-2012, 01:01 AM
#3
Supporting Vendor
Thread Starter
My car is lowered on stock bolts. I scrape in 2 spots just going in/out of my driveway plus everywhere else I go.
Right now I have the steel (add on) plates which work fine but sound like demons from hell every time I scrape.
I'm sure yours would be quiet, but honestly, I think I'd wear them thru in 2 or 3 weeks.
What (specific) plastic are they made of?
How long is the warranty?
Right now I have the steel (add on) plates which work fine but sound like demons from hell every time I scrape.
I'm sure yours would be quiet, but honestly, I think I'd wear them thru in 2 or 3 weeks.
What (specific) plastic are they made of?
How long is the warranty?
If your vette is constantly scraping, then you probably will eventually wear through. We have a customer with a A&A SC with the lowered radiator support plus he was lowered. He scraped everywhere, even cruising fast down the road the whoops in the road made him scrape. He was able to wear through in a couple weeks. He's the only one to burn them out like that that we know of.
I've had a set on my C5Z for over a year now and they all scraped up but haven’t worn through and I scrape the on purpose a lot of time for testing purposes.
We sent him another pair but he was cool and knew his vette would abuse anything he put on there so he didn’t ask for a refund. We have a customer satisfaction guarantee. But if your scraping like the guy with the A&A setup then they may not last as long as you would want. But with them installed you won't hear the scraping.Thanks!
11-20-2012, 11:18 AM
#4
Race Director
Hi froggy47,
If your vette is constantly scraping, then you probably will eventually wear through. We have a customer with a A&A SC with the lowered radiator support plus he was lowered. He scraped everywhere, even cruising fast down the road the whoops in the road made him scrape. He was able to wear through in a couple weeks. He's the only one to burn them out like that that we know of. I've had a set on my C5Z for over a year now and they all scraped up but haven’t worn through and I scrape the on purpose a lot of time for testing purposes. We sent him another pair but he was cool and knew his vette would abuse anything he put on there so he didn’t ask for a refund. We have a customer satisfaction guarantee. But if your scraping like the guy with the A&A setup then they may not last as long as you would want. But with them installed you won't hear the scraping.
Thanks!
If your vette is constantly scraping, then you probably will eventually wear through. We have a customer with a A&A SC with the lowered radiator support plus he was lowered. He scraped everywhere, even cruising fast down the road the whoops in the road made him scrape. He was able to wear through in a couple weeks. He's the only one to burn them out like that that we know of.
I've had a set on my C5Z for over a year now and they all scraped up but haven’t worn through and I scrape the on purpose a lot of time for testing purposes. We sent him another pair but he was cool and knew his vette would abuse anything he put on there so he didn’t ask for a refund. We have a customer satisfaction guarantee. But if your scraping like the guy with the A&A setup then they may not last as long as you would want. But with them installed you won't hear the scraping.Thanks!
11-23-2012, 02:02 PM
#7
Supporting Vendor
Thread Starter
Hope everyone is having a great Thanksgiving week end!
Take advantage of the sale while its still on!
Take advantage of the sale while its still on!
11-26-2012, 03:46 PM
#8
Supporting Vendor
Thread Starter
This Sale Ends at the end of the 27th! Nows the time to save.
11-27-2012, 03:50 AM
#9
Supporting Vendor
Thread Starter
Hi Everyone,
Hope you had a wonderful Thanksgiving!
Just a reminder for those thinking about purchasing one of our quality products, today is the last day for this sale.
You still have a little time.
Also, we want to thank everyone that participated in this sale. Your business is greatly appreciated!
Hope you had a wonderful Thanksgiving!
Just a reminder for those thinking about purchasing one of our quality products, today is the last day for this sale.
You still have a little time.
Also, we want to thank everyone that participated in this sale. Your business is greatly appreciated!
