FS 2 piece C6 Z06 front rotors-hats only
#1
Melting Slicks
Thread Starter
FS 2 piece C6 Z06 front rotors-hats only
2 hats only Performance AFX alum hats.
Excellent condition.
$125 for the pair plus shipping from Fl 32550.
I'm selling a few items and getting ready for the C7.
http://shop.performanceafx.com/C6-Fr...100166-167.htm
.
Excellent condition.
$125 for the pair plus shipping from Fl 32550.
I'm selling a few items and getting ready for the C7.
http://shop.performanceafx.com/C6-Fr...100166-167.htm
.
#3
Melting Slicks
Thread Starter
#4
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,088
Received 8,927 Likes
on
5,332 Posts
Bill
#5
Race Director
Hi Bill
Do you know if either the regular or heavy duty rings will work with these rotors?
Or at least with the hats you have, can you use either/or with your hats?
I might be interested in these if I could use both the regular and heavy duty rings.
TIA,
Bob
Do you know if either the regular or heavy duty rings will work with these rotors?
Or at least with the hats you have, can you use either/or with your hats?
I might be interested in these if I could use both the regular and heavy duty rings.
TIA,
Bob
#6
Melting Slicks
Thread Starter
The hats I have for sale are from AFX fixed standard rotors. The are the exact ones the link in the first post takes you to.
I do not know if they will interchange with the floating or heavy duty rotors.
I do not know if they will interchange with the floating or heavy duty rotors.
#7
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,088
Received 8,927 Likes
on
5,332 Posts
The only way to know is to call Bob Finlayson at AFX.
Bill
#8
Safety Car
Would you be willing to sell one? If not, could you tell me what the dimension is between the center of two outermost mounting screws (to the disc) and the dimension between one outermost mounting screw and an adjacent one? I know that might sound strange but I have a ring I would like to know if it would mount to this hat. (Not for actual vehicle use.)
#9
Melting Slicks
Thread Starter
Would you be willing to sell one? If not, could you tell me what the dimension is between the center of two outermost mounting screws (to the disc) and the dimension between one outermost mounting screw and an adjacent one? I know that might sound strange but I have a ring I would like to know if it would mount to this hat. (Not for actual vehicle use.)
I will measure tonight and get back to you.
#11
Melting Slicks
Thread Starter
Would you be willing to sell one? If not, could you tell me what the dimension is between the center of two outermost mounting screws (to the disc) and the dimension between one outermost mounting screw and an adjacent one? I know that might sound strange but I have a ring I would like to know if it would mount to this hat. (Not for actual vehicle use.)
The distance between 2 adjacent holes is a fat 2 1/8" and the distance across the hub to the center of the mtg. holes is 8 1/4".
Hope this helps.
#12
Safety Car
Thanks. I will measure my disc tonight and see if this will work. I've been patiently waiting for something like because hats only do not come up for sale often so I'll keep my fingers crossed.
#14
Safety Car