Soma07

With Pfadt gone and Hardbar seemingly gone as well does any one else make delrin upper shock mounts?

Grabbed_Crow_Mobe

I know Phoenix does Delrin bushings. Not sure about shock mounts but it's worth giving them a call. Joe's a great guy and can probably help.

blkbrd69

Pretty sure Vansteel carries them.

http://www.vansteel.com/

He also has Hardbar shim and stud kits.

db2xpert

Hardbar is still there.
The website was hacked, still working to get it back up.
Gary is hoping for another week...or so.
You can email him. Don't have it handy, but can post it tomorrow.

db2xpert

Gary's email


ghoffman@hardbarusa.com

redtopz

I use stock upper and lower shock bushings for nasa st2 and scca t1. No issues whatsoever.

CP Thunder

I have a used set of Hardbar mounts here somewhere......let me know if you are interested and I will find them for you.

smellya

I have some PFADT Rear Spherical Shock Bearings. brand new in the bag they came in. Pm me if you want them.

REVHARD

i got the complete set from Doug Rippie when I purchased my Bilsteins...they should have them

JRMaroon1

If Poly is an option, check these out. I installed front and rear to replace worn stock mounts.

http://www.vbandp.com/auto-parts/my-...product_id=830

braknl8

Good chance poly will break a shock or two if you drive hard....

CP Thunder

More pics here.... http://forums.corvetteforum.com/memb...sale-1915.html

There is one silver 'washer' disc missing. A regular stock one would probably work as a replacement. These were on the car for about 4 months and we switched to a different mounting system.

RX-Ben

https://banskimotorsports.com/Pin_Top_Shock_Mounts.html

2MCHPWR

Anze spherical mounts look awesome but are pricey (~$800 / set):

http://forums.corvetteforum.com/auto...nd-upward.html

JRMaroon1

Did you experience this type of failure? This is a concern as they were installed on a track car.

braknl8

Not personally. I've never ran poly on shocks for that reason. Though not mine, a lot of shafts have been broken.