which coolant hoses for track day C6?
#1
Racer
Thread Starter
which coolant hoses for track day C6?
Wondering what is recommended for hoses on a track day C6? Lots of info here about radiators and coolant/water/water wetter etc. but couldn't find any on which hoses to use. Car is 2006 C6 LS2 MN6 with 68K miles. Factory radiator cracked so wanted to do the whole system while I'm at it. Leaning towards a DeWitts with integral oil coolers.
Thanks,
Steve
Thanks,
Steve
#3
Tech Contributor
Stock. Unlike the old days, OEM hoses are pretty darn stout. If money is burning a hole in your pocket, take a look at Samco.
#5
Burning Brakes
I had the same thought you did and replaced all my hoses with silicone from a Corvette Forum vendor when I installed the new radiator. That crap sprung a leak in less than a year and I went back to OEM. Also noticed that the vendor no longer sells those.
#6
Racer
Thread Starter
Sounds like factory hoses with regular replacement is the way to go. Has anyone done a materials stress test for temp? From what I can find, temp would be the main concern as chemical resistance to oils, fuel, and ozone are good.
#7
Burning Brakes
#8
Burning Brakes
My LG's have been on for 3 years for me and counting. They came with the car when I bought it and were probably 1-2 years old already. Ripped out the radiator twice in the last year, lots of R&R around the hoses, no issues. I think you had a fluke. Another vote for LG Silicone hoses here.