When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I posted this in the regular C6Z section, but figured I would post here as well. The car is an 08 and has about 30xxx miles on it, with about six DE's. I got the car with 22000 on it two years ago.
I posted this in the regular C6Z section, but figured I would post here as well. The car is an 08 and has about 30xxx miles on it, with about six DE's. I got the car with 22000 on it two years ago.
That is also the spot on the valve with the least amount of wear. The measurement should be taken in the spot where it has the most amount of stem wear. Which is normally in the middle of it's travel.
That is also the spot on the valve with the least amount of wear. The measurement should be taken in the spot where it has the most amount of stem wear. Which is normally in the middle of it's travel.
Randy
Ah ha.
So tell me what number you want and I'll move the stem and give it to you.
10-19-2014, 09:28 AM
My wiggle test
