LG Motorsports Carbon WC Hoods GET THEM NOW!
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
LG Motorsports Carbon WC Hoods GET THEM NOW!
Thinking of some extra cooling or added downforce on your C6 Corvette? The LG Motorsports C6 WC Carbon hood is just what you need!
These hoods were developed during our years in World Challenge racing to help produce the best cooling effect and downforce. The rows of louvers draw air through the radiator and out over the top of the car. Making your radiator work better and aid in front aero grip!
Get yours now before we are out of stock again. Production is having a very hard time keeping up with demand this year, and we have a limited number of pin on, and bolt on versions left in stock. If you are thinking about it, now is the time!!!
MSRP $1995 Pin on / $2995.95 Bolt on replacement
These hoods were developed during our years in World Challenge racing to help produce the best cooling effect and downforce. The rows of louvers draw air through the radiator and out over the top of the car. Making your radiator work better and aid in front aero grip!
Get yours now before we are out of stock again. Production is having a very hard time keeping up with demand this year, and we have a limited number of pin on, and bolt on versions left in stock. If you are thinking about it, now is the time!!!
- 10 lbs (pin on version)
- 15lbs (bolt on replacement)
- Carbon fiber construction
- Clear coated top exposed carbon finish
- Increased cooling effiecency
- Increased front downforce
- SCCA World Challenge legal
MSRP $1995 Pin on / $2995.95 Bolt on replacement
#4
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
I have one of the few hoods left inspected, crated and ready to go if someone is looking.
These are hard to keep in stock so now is the time to grab one.
These are hard to keep in stock so now is the time to grab one.
#7
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Installed another one here at the shop with an E -force.
In the Texas heat we saw almost ANOTHER drop of 18 degrees water temp with the hood AFTER the new radiator.
In the Texas heat we saw almost ANOTHER drop of 18 degrees water temp with the hood AFTER the new radiator.
#10
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Few more customer installed pictures.
Just 1 or 2 left now before the next production run is finished!
Last edited by Anthony @ LGMotorsports; 06-23-2016 at 03:34 PM.
#12
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
What would you like to see? I know the race hoods we used removed the headlights (the headlight covers were molded into the hood).
#13
Pro
My main goals are reduced heat and reduced lift at high speed without making my car look like a guy with no experience took a sawzall to his hood and pop riveted on some louvers . My car is still on the right side of being street legal, I'd like to like to keep headlights for now.
#16
Racer
Put this on the car last Christmas! Absolutely stunning! One of the few purchases that I shelled out big bucks for and as soon as I opened the crate said "DAMN". I can confirm the reduction in water temps also....waited all Christmas this year for a sell on the GT2 wing to match this!