Anyone have any thoughts on this clutch for dd/track car?
07-17-2015, 08:59 AM
#1
Safety Car
Thread Starter
Anyone have any thoughts on this clutch for dd/track car?
Car has 500+rwhp but is a dd and tracked once a month. I have Spec 3+ now, but it is really too much for dd. Motor is out for rebuild, so looking to change to a more street friendly clutch.
https://www.corvetteforum.com/forums...-flywheel.html
Thoughts?
https://www.corvetteforum.com/forums...-flywheel.html
Thoughts?
07-17-2015, 10:13 AM
#2
Melting Slicks
Member Since: Sep 2003
Location: If you don't weigh in you don't wrestle Road America
Posts: 3,031
Likes: 0
Received 73 Likes
on
54 Posts
That is a clutch, I've been installed a lot of RPS clutches over the years and only had issues with one. The nice thing about the carbon clutches is that if they start to slip they get tacky and grab instead of glazing and slipping more.
If you're slipping the clutch a lot it will get a little grabby but once it cools down it will go back to normal.
Solid clutch, plus it's rebuild-able
If you're slipping the clutch a lot it will get a little grabby but once it cools down it will go back to normal.
Solid clutch, plus it's rebuild-able