Track tire question (C6Z)
#1
Racer
Thread Starter
Track tire question (C6Z)
Hello everyone. I am looking at buying some scrub slicks instead of street tires. I have looked around and see Pirelli slicks but can only find the rears in a 305/690/19. Will these fit ok on stock C6Z wheels, and will there be any noticeable handling differences with the smaller width?
OR:
Would I be better off to find R7s in the correct sizes for my wheels?
Im open to other suggestions as well. Thanks in advance.
OR:
Would I be better off to find R7s in the correct sizes for my wheels?
Im open to other suggestions as well. Thanks in advance.
#2
I just bought a set of 305/660-18F and 315/680-18R for my C7Z. The diameters look dead on but obviously there is less of a stagger front to rear width. I haven't had a chance to run them on track yet though.
#3
Racer
I have bought several sets of tires from http://www.jbracingtires.net/ and have had great interactions with them. Phone is the best way to get a hold of them, but they do respond to emails
#4
Advanced
Hello everyone. I am looking at buying some scrub slicks instead of street tires. I have looked around and see Pirelli slicks but can only find the rears in a 305/690/19. Will these fit ok on stock C6Z wheels, and will there be any noticeable handling differences with the smaller width?
OR:
Would I be better off to find R7s in the correct sizes for my wheels?
Im open to other suggestions as well. Thanks in advance.
OR:
Would I be better off to find R7s in the correct sizes for my wheels?
Im open to other suggestions as well. Thanks in advance.
Last edited by Radiologue; 08-11-2016 at 11:10 PM.
#5
Melting Slicks
Have a set of C6Z OEM size Hoosier R6's with about 10-12 track day sessions on them. Still in great shape but about 3.5 yrs. old. Asking $500 plus shipping.