flush mount flat splitter for C6?
#1
Safety Car
Thread Starter
flush mount flat splitter for C6?
i bought an 09 Z and cant get it in my driveway or on the trailer with the stock black plastic lower valance. im thinking of making/buying a flat, flush style splitter (ill admit mostly for looks)
has anyone ever done this? the front of the c6 isnt flat. the sides are lower than the center. so the center may need some stand offs.
does anyone sell one?
or has anyone made one? if so out of what, and how did you mount it?
any pics or suggestions?
something like these. i want it short enough to not need turnbuckles.
this would be pretty similiar to the c6 with the raised center.
has anyone ever done this? the front of the c6 isnt flat. the sides are lower than the center. so the center may need some stand offs.
does anyone sell one?
or has anyone made one? if so out of what, and how did you mount it?
any pics or suggestions?
something like these. i want it short enough to not need turnbuckles.
this would be pretty similiar to the c6 with the raised center.
#2
Pro
If it's for looks you won't need turnbuckles since it won't do anything anyway. That APR piece you attached should look cool and do nothing. But you're talking about the black rubber air damn valance thing hangs down in the front? It's spring loaded (at least it was on my dad's Grandsport) - don't think it should be a problem on a drive way or trailer.