1967 Pro-Street Roadster For Sale
#1
1967 Pro-Street Roadster For Sale
I have a 1967 Corvette 4 speed Roadster that I bought out of an estate several years ago. Originally a 427/435 car;but that train left long ago. It was very "old school" so I dumped the drivetrain and started fresh.
Frame and birdcage are great. Frame and underneath are done. New SSBC calipers and rotors,new stainless lines,new master cylinder,front end is VBT tubular control arms, new AFCO coil-overs all around, new Flaming River tilt column and steering box. New GM sidepipe covers.
Rear end is Dana 60 with 4:56 gears--rebuilt--all welds smoothed, powdercoated. No cage or sidebars---single sidebar behind the seats.
Tons of parts--new bumpers, two hoods ( L88 and "stinger" that is one inch higher than stock), hardtop (no soft top).
Rear tires are Hoosier Radials (31 x 16.50 x 15) on old Centerline wheels (15 x 12)--fronts are "skinnies" on 15 x 4 Centerlines.
Car was originally Marlboro Maroon with Saddle interior. Now some GM yellow.
Car needs paint, a new Muncie trans. and interior finished. I have stock 67 seats but they need recovered.
Will sell as a "roller" for $28K including parts.
Also have 555 inch ZL-1 all aluminum BBC (Brodix), 715 HP on pump gas.
Price is $15K---new motor. Looks like a stock BBC.
EXtensive pix available. (If I knew how to post them I would.)
But you all know what a 67 looks like---
If you're interested, email: DHall9251@aol.com
Thanks-Dandy Don
Frame and birdcage are great. Frame and underneath are done. New SSBC calipers and rotors,new stainless lines,new master cylinder,front end is VBT tubular control arms, new AFCO coil-overs all around, new Flaming River tilt column and steering box. New GM sidepipe covers.
Rear end is Dana 60 with 4:56 gears--rebuilt--all welds smoothed, powdercoated. No cage or sidebars---single sidebar behind the seats.
Tons of parts--new bumpers, two hoods ( L88 and "stinger" that is one inch higher than stock), hardtop (no soft top).
Rear tires are Hoosier Radials (31 x 16.50 x 15) on old Centerline wheels (15 x 12)--fronts are "skinnies" on 15 x 4 Centerlines.
Car was originally Marlboro Maroon with Saddle interior. Now some GM yellow.
Car needs paint, a new Muncie trans. and interior finished. I have stock 67 seats but they need recovered.
Will sell as a "roller" for $28K including parts.
Also have 555 inch ZL-1 all aluminum BBC (Brodix), 715 HP on pump gas.
Price is $15K---new motor. Looks like a stock BBC.
EXtensive pix available. (If I knew how to post them I would.)
But you all know what a 67 looks like---
If you're interested, email: DHall9251@aol.com
Thanks-Dandy Don
#3
Burning Brakes
Send me some pictures and more information.
tyoneal(at) flash(Dot)net
#4
Instructor
Member Since: Mar 2010
Location: formerly Gilbert, Az. Now San Diego Az and Ca.
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Don, this is a great start for what I'd like to do. I like it all. If my financial situation does what it is supposed to do, I may have to come visit and make an offer on roller and engine. You open to offers aren't you?
Thanks, Don in Az
Thanks, Don in Az
#5
67 Pro Street Corvette
Let me know what your plans are. I live about 50 miles SE of Cleveland Hopkins Airport (CLE) and about 10 miles from Akron-Canton Airport (CAK) if you want to check air connections. I can pick you up.
I'm open to serious offers---
Don Cell (330) 618-2617
#7
67 Pro Street Corvette
I have a 1967 Corvette 4 speed Roadster that I bought out of an estate several years ago. Originally a 427/435 car;but that train left long ago. It was very "old school" so I dumped the drivetrain and started fresh.
Frame and birdcage are great. Frame and underneath are done. New SSBC calipers and rotors,new stainless lines,new master cylinder,front end is VBT tubular control arms, new AFCO coil-overs all around, new Flaming River tilt column and steering box. New GM sidepipe covers.
Rear end is Dana 60 with 4:56 gears--rebuilt--all welds smoothed, powdercoated. No cage or sidebars---single sidebar behind the seats.
Tons of parts--new bumpers, two hoods ( L88 and "stinger" that is one inch higher than stock), hardtop (no soft top).
Rear tires are Hoosier Radials (31 x 16.50 x 15) on old Centerline wheels (15 x 12)--fronts are "skinnies" on 15 x 4 Centerlines.
Car was originally Marlboro Maroon with Saddle interior. Now some GM yellow.
Car needs paint, a new Muncie trans. and interior finished. I have stock 67 seats but they need recovered.
Will sell as a "roller" for $28K including parts.
Also have 555 inch ZL-1 all aluminum BBC (Brodix), 715 HP on pump gas.
Price is $15K---new motor. Looks like a stock BBC.
EXtensive pix available. (If I knew how to post them I would.)
But you all know what a 67 looks like---
If you're interested, email: DHall9251@aol.com
Thanks-Dandy Don
Frame and birdcage are great. Frame and underneath are done. New SSBC calipers and rotors,new stainless lines,new master cylinder,front end is VBT tubular control arms, new AFCO coil-overs all around, new Flaming River tilt column and steering box. New GM sidepipe covers.
Rear end is Dana 60 with 4:56 gears--rebuilt--all welds smoothed, powdercoated. No cage or sidebars---single sidebar behind the seats.
Tons of parts--new bumpers, two hoods ( L88 and "stinger" that is one inch higher than stock), hardtop (no soft top).
Rear tires are Hoosier Radials (31 x 16.50 x 15) on old Centerline wheels (15 x 12)--fronts are "skinnies" on 15 x 4 Centerlines.
Car was originally Marlboro Maroon with Saddle interior. Now some GM yellow.
Car needs paint, a new Muncie trans. and interior finished. I have stock 67 seats but they need recovered.
Will sell as a "roller" for $28K including parts.
Also have 555 inch ZL-1 all aluminum BBC (Brodix), 715 HP on pump gas.
Price is $15K---new motor. Looks like a stock BBC.
EXtensive pix available. (If I knew how to post them I would.)
But you all know what a 67 looks like---
If you're interested, email: DHall9251@aol.com
Thanks-Dandy Don