1963 Split Window Fuelie - Frame Off Restored
#1
Instructor
Thread Starter
1963 Split Window Fuelie - Frame Off Restored
I'm in the final stages of finishing a full frame off restoration on a Riverside Red on Black '63 SWC Fuelie. All of the restoration work is complete and it is currently being re-assembled. Anticipated completion is ~1 month.
The car can be inspected at the restoration shop in Orange, CA. Various shops have done different aspects of the restoration but everything has been done to very high standards. The injection system was restored by John's FI in Paramount, CA.
All #'s are correct and this car will make a great car to show and drive. The only modification from stock is I added disc brakes to the front (stock drums go with the sale) and reproduction knock offs. I can source and provide correct '63 steel wheels and hubcaps if the new owner would prefer. Power brakes are the only option on the car.
I'll be looking to sell the finished car in the $125k to $150k range. I will negotiate if someone would like it sooner. I can get updated photos or arrange for the car to be inspected at the restoration shop. I've included several photos from various stages of restoration. Interested parties message me or call me at 949-637-8858.
The car can be inspected at the restoration shop in Orange, CA. Various shops have done different aspects of the restoration but everything has been done to very high standards. The injection system was restored by John's FI in Paramount, CA.
All #'s are correct and this car will make a great car to show and drive. The only modification from stock is I added disc brakes to the front (stock drums go with the sale) and reproduction knock offs. I can source and provide correct '63 steel wheels and hubcaps if the new owner would prefer. Power brakes are the only option on the car.
I'll be looking to sell the finished car in the $125k to $150k range. I will negotiate if someone would like it sooner. I can get updated photos or arrange for the car to be inspected at the restoration shop. I've included several photos from various stages of restoration. Interested parties message me or call me at 949-637-8858.
#2
Burning Brakes
Nice
A new 63' fuelie. A lot of effort goes into this kind of a restoration. If the saying "buy the best car you can afford for the $" is true, here is one. GLWTS
#4
Instructor
Thread Starter
My '63 SWC fuelie is not quite complete...but close!! The shop had some delays over the holidays. Attached are a couple pictures from ~Thanksgiving. I lot has been done since these photos were taken....hopefully I can make it over to the shop later this week to take some updated photos. Happy New Year!
Is vehicle completed? If so send pics to diesel1125@aol.com
Thanks
Thanks
#6
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,366
Received 5,321 Likes
on
2,770 Posts
The car is for sale now though, correct?
#7
Instructor
Thread Starter
#8
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,366
Received 5,321 Likes
on
2,770 Posts
GLWTS !
The following users liked this post:
wards70 (01-05-2016)
#9
Advanced
Very Nice
Hit or no hit body?
Any GM published documentation and owner history.
Looks like your doing a great job on restoration..
#10
Instructor
Thread Starter
The car had a replacement block when I purchased it so I sourced a correct date restoration block (std bore) for the restoration. I have many more pictures of the build on my website of pre restoration and during. Unfortunately I don't have much history on the car. Any interested parties are more than welcome to inspect the car or give me a call to discuss.
Here is a link to more info: http://www.domesticimports.com/#!196...w-fuelie-/c88s
Here is a link to more info: http://www.domesticimports.com/#!196...w-fuelie-/c88s
#11
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,366
Received 5,321 Likes
on
2,770 Posts
Who is Domestic Imports?
#12
Instructor
Thread Starter