1967 Coupe 327 NOM For Sale Seattle WA
02-09-2016, 02:11 PM
#2
Safety Car
Warren, again ……. just what I'm looking for but on the opposite side of the country ……… grrrrrr!!!
GLWS !
GLWS !
02-09-2016, 06:18 PM
#3
02-09-2016, 07:45 PM
#5
Safety Car
02-10-2016, 07:52 PM
#7
I would be happy to take the car to any local mechanic of your choosing to have it checked out.
Warren
Last edited by warrenl-79; 02-10-2016 at 07:53 PM.
02-11-2016, 01:05 PM
#9
Hi Warren,
Nice '67 and a fair price! A couple of questions and you can reply with a PM or send me an email (mesaclaims@aol.com) if you prefer.
Was the Vette stripped prior to refinishing and what type of paint material was applied (acrylic lacquer, urethane, etc)? Is the front end original and/or have their been previous repairs with panels replaced? Any history on previous owners and has the '67 been a Western car its entire life?
Thanks for your time.
Keith
Nice '67 and a fair price! A couple of questions and you can reply with a PM or send me an email (mesaclaims@aol.com) if you prefer.
Was the Vette stripped prior to refinishing and what type of paint material was applied (acrylic lacquer, urethane, etc)? Is the front end original and/or have their been previous repairs with panels replaced? Any history on previous owners and has the '67 been a Western car its entire life?
Thanks for your time.
Keith
Last edited by Keith Carlson; 02-11-2016 at 01:06 PM.
02-11-2016, 05:56 PM
#11
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,414
Received 5,331 Likes
on
2,775 Posts
02-11-2016, 06:37 PM
#12
Turn 12!
It has a 66 hood. Did anyone else catch that?
02-11-2016, 07:36 PM
#13
engine pad stamping matches the car's vin # 194377S101569
build date is last week of September 1966
Casting date for the block according to the seller is a first week of June 66 there is a bit of a gap between the two.
build date is last week of September 1966
Casting date for the block according to the seller is a first week of June 66 there is a bit of a gap between the two.
02-11-2016, 09:06 PM
#14
Safety Car
02-12-2016, 09:09 AM
#15
Racer
02-12-2016, 10:29 AM
#16
Racer
Nice Car!
The following users liked this post:
warrenl-79 (02-17-2016)
02-12-2016, 05:08 PM
#18
Le Mans Master
His add states-----
1967 Corvette Coupe - Rally Red - 327ci 350hp L-79 (non original engine)
Looking for a solid 1967 Corvette Coupe, that is a non-original engine car, that looks fantastic and thrilling to drive?
He is upfront as can be about being NON ORIGINAL MOTOR
1967 Corvette Coupe - Rally Red - 327ci 350hp L-79 (non original engine)
Looking for a solid 1967 Corvette Coupe, that is a non-original engine car, that looks fantastic and thrilling to drive?
He is upfront as can be about being NON ORIGINAL MOTOR
Last edited by Bowtyeguy; 02-12-2016 at 05:56 PM.
02-12-2016, 05:58 PM
#19
Yes the '66 hood is odd. It was on the car when I bought it, and the previous owner said it was on the car when he got it. I wish I knew the history behind it. It is what it is.
The previous owner had the engine built for this car, I assume he had the pad stamped to match, but the block is obviously from '66 judging from the casting numbers. He provided me with all the engine build information, and I will pass that along with the car.
I'm not trying to pull the wool over anyone here, I just want to be honest in what I know about the car.
The previous owner had the engine built for this car, I assume he had the pad stamped to match, but the block is obviously from '66 judging from the casting numbers. He provided me with all the engine build information, and I will pass that along with the car.
I'm not trying to pull the wool over anyone here, I just want to be honest in what I know about the car.
The following users liked this post:
Ohiomark (02-15-2016)
02-12-2016, 06:29 PM
#20
Instructor
Yes the '66 hood is odd. It was on the car when I bought it, and the previous owner said it was on the car when he got it. I wish I knew the history behind it. It is what it is.
The previous owner had the engine built for this car, I assume he had the pad stamped to match, but the block is obviously from '66 judging from the casting numbers. He provided me with all the engine build information, and I will pass that along with the car.
I'm not trying to pull the wool over anyone here, I just want to be honest in what I know about the car.
The previous owner had the engine built for this car, I assume he had the pad stamped to match, but the block is obviously from '66 judging from the casting numbers. He provided me with all the engine build information, and I will pass that along with the car.
I'm not trying to pull the wool over anyone here, I just want to be honest in what I know about the car.