A Arm / Control Arm bushing bolt torque
#1
Le Mans Master
Thread Starter
A Arm / Control Arm bushing bolt torque
I replaced my control arm / A-ARM bushings when I replaced my front spring. I have an AIM, and the torque specs, but they seem to vary?
What are the torque specs for the bolts that compress the control arm busings? I am talking about the 8 bolts, 2 per arm that go through the bushings.
I waited until I was done, I was told to do it at normal ride height.
Mark
What are the torque specs for the bolts that compress the control arm busings? I am talking about the 8 bolts, 2 per arm that go through the bushings.
I waited until I was done, I was told to do it at normal ride height.
Mark
#4
CF Senile Member
I saved this a while back - it has some good torque data for Corvettes.
It was posted on this forum - not sure who to credit for the info.
Dave
It was posted on this forum - not sure who to credit for the info.
Dave
#6
Le Mans Master
Member Since: Nov 2000
Location: Going too fast over the hill. Iowa
Posts: 7,246
Likes: 0
Received 18 Likes
on
16 Posts
The updated version of that is at the bottom of this page:
http://www.corvetteforum.net/classic...e/index5.shtml
http://www.corvetteforum.net/classic...e/index5.shtml