C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

66 Transistorized Ignition HELP Please

Thread Tools
 
Search this Thread
 
Old 06-21-2006, 06:37 PM
  #1  
Paintbug
Instructor
Thread Starter
 
Paintbug's Avatar
 
Member Since: Jan 2006
Location: Pensacola Florida
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default 66 Transistorized Ignition HELP Please

Anybody have a BB with TI ignition? Trying to go back with TI ignition on the car. I have the wiring diagram that is on T.I. Specialty's web site. Must of it I understand but my problem is the pink wires. I put in a new dash and engine harness which has three pink wires. to that's together which would go to the positive side of the coil. I've got another single pink wire that come out of the harness just above the wiper motor and another pink wire that come threw the fire wall from the dash harness. Can anybody help me with where these wires hook up to or direct me to where I can get the info that I need?
Old 06-21-2006, 08:41 PM
  #2  
AZDoug
Race Director
 
AZDoug's Avatar
 
Member Since: Oct 2005
Location: Camp Verde AZ
Posts: 12,434
Received 1,478 Likes on 905 Posts
C1 of Year Finalist (performance mods) 2019
2017 C1 of Year Finalist

Default

A lot of info can be gained with a volt meter.

Which wires are hot with the ignition on RUN? Which wires are hot with the ignition on START?. Check them and tag them for future reference. With that info and your wiring diagram, you should be able to figure it out

Doug



Quick Reply: 66 Transistorized Ignition HELP Please



All times are GMT -4. The time now is 07:43 AM.