64 owners survey - Raised Pad under door handle
#1
Drifting
Thread Starter
64 owners survey - Raised Pad under door handle
Looking for information from all owners of 64 coupes and convertibles regarding the presence of the "raised pad" under the door handle.
If you have the original door skins on your 64 and are willing to provide your VIN in a 123XX (approximate) format, please post or email me to let me know if your car has the raised pad or not.
Nolan Adams book states the change from with to without the pad occured around VIN 15000.
This is just a sanity check.
thanks,
tc
If you have the original door skins on your 64 and are willing to provide your VIN in a 123XX (approximate) format, please post or email me to let me know if your car has the raised pad or not.
Nolan Adams book states the change from with to without the pad occured around VIN 15000.
This is just a sanity check.
thanks,
tc
#3
POSSE ZR-1 Driver
105578 Nov 63 build. With raised pads.
#5
Drifting
Thread Starter
Great..keep'em coming !!
Also interested if the coupe and convertible changed at the same time.
Obviously, the door skin tooling is different.
tc
Also interested if the coupe and convertible changed at the same time.
Obviously, the door skin tooling is different.
tc
#10
Team Owner
My Oct 13, 1963 built coupe has the pads.
#11
My fathers 64 has them and it was built in oct 63. I should say it did have them-a compressor came loose off a trailer and barrelled down a hill into the drivers door. Looking for a replacement currently.
#20
Drifting
Member Since: Jul 2005
Location: Avondale Arizona
Posts: 1,512
Received 520 Likes
on
192 Posts
2024 Corvette of the Year Finalist - Modified
2023 C2 of the Year Winner - Modified
2022 C2 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist - Unmodified
2019 C2 of Year Finalist (appearance mods)
St. Jude Donor '19-'20-'21
My 4347 '64 convertable, built on November 3, 1963 has the raised door handle pads.
Dave64
Dave64