C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

Soft Top Frame Adjustments

Thread Tools
 
Search this Thread
 
Old 02-07-2007, 12:08 PM
  #1  
karista
Advanced
Thread Starter
 
karista's Avatar
 
Member Since: Jun 2004
Location: tierra verde fl
Posts: 96
Likes: 0
Received 1 Like on 1 Post

Default Soft Top Frame Adjustments

I have a gap of about 3/4 inch on the driver side window top on my 63 Convertible. I adjusted the door up as far as it would go, also the window is up to its stop. Is there a adjustment that can be done to the frame itself, where I could lower it so the weather seal closes the gap with the window glass?
Old 02-07-2007, 01:08 PM
  #2  
kenEDMUNDS
Burning Brakes
 
kenEDMUNDS's Avatar
 
Member Since: May 2003
Location: DAVIE/FORT LAUDERDALE FL
Posts: 990
Likes: 0
Received 4 Likes on 3 Posts
Default

Originally Posted by karista
I have a gap of about 3/4 inch on the driver side window top on my 63 Convertible. I adjusted the door up as far as it would go, also the window is up to its stop. Is there a adjustment that can be done to the frame itself, where I could lower it so the weather seal closes the gap with the window glass?
yES, remove the fiberglass panels behind the seats and there are 2 bolts on each side that you can adjust the height and pitch of the top.



Quick Reply: Soft Top Frame Adjustments



All times are GMT -4. The time now is 07:08 PM.