BOB WINSKI

Hi Guys
Does anyone know were i can buy the worm gears or a rebuild kit for the steering box for a 60 .Thanks in advance.Bob W

GCD1962

Corvette Central, Corvette America, etc. runs about $450 for complete parts & bearings

One Manufacturer, many sellers

gschaerer

You might try ZIP Products in Richmond, VA. Try www.zipproducts.com.

ml1955

My Corvette Central kit worked out well. Steering is much improved.

drlou

GTR1999 does an awesome job. You won't go wrong sending it to him.

PinkVetteLady

Corvette Steering in South Carolina has the complete rebuild kit for $245, that includes the sector gears and worm gear along with new bushings. Pretty good vendor to deal with. He also sells the Jeep box kit for $645?

remotecontroller

$245? Dang!! I just blew $400+ for the kit from Corvette central....

PinkVetteLady

Sorry man.. Here is the link, not sure how long it will stay up since they are not a supporting vendor.. However sticking Corvette Steering in my browser took me right to em..

http://www.corvettesteering.com/corvette%20parts.htm

GCD1962

That's the price for a C-2. It does not list a kit for the C-1. A C-1 complete kit has shaft with worm gear, sector gear, sector roller, and all bearings within the box. The C-1 kit is not as simple as the C-2

PinkVetteLady

The kit for the C2 that CS sells does include all that. I'm sorry though I did miss that this was for a 60 as the OP put in his post. Sorry.

However it looks like he has kits for 58 and up cars and trucks. Does the Straight axle cars conform to this? I'm not sure but here is the link that shows the other kit.

http://www.corvettesteering.com/gm%20parts.htm

GreaseMonkey

Check with Bair's in Linesville, PA. Great family owned business. They rebuilt my box for my '64. Can't remember how much I paid though. Give them a buzz..

joe@zip

Not the correct link, and I don't suggest clicking that one.

Try www.zip-corvette.com if you want to browse our site, though we only sell the bearing kit.