Body mount locations
#1
Instructor
Thread Starter
Member Since: Jun 2006
Location: Scottsdale AZ
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Body mount locations
I am wanting to build a steel body dolly for a SWC. Does anyone have a drawing of the body mount locationd with measurments?
Thanks in advance
I am building a vette Rod, 63 SWC body, LT5 engine and trans, C5 seats.
Thanks in advance
I am building a vette Rod, 63 SWC body, LT5 engine and trans, C5 seats.
#2
Team Owner
http://www.corvette-restoration.com/...Body_Dolly.pdf
jack
Last edited by 66jack; 06-25-2010 at 07:07 PM.
#3
Intermediate
I used the measurements in Joseph A. Tripoli's Corvette Chassis Restoration Guide to build supports for my '64 body. His measurements are based on a datum plane, so you can use the numbers to build a dolly at a convenient height. Hope this helps.