BOB WINSKI

Hi Guys,I did a google search for after market power windows for my 60.I saw a few web sites but none of them had specified them for a corvette.Has anyone put in aftermarket power windows in there C1 car,Thanks Bob W

Frankie the Fink

This kit from CC looks like a plug and play conversion...been thinking about it myself:
http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000050e~Z5 Z5Z5ABWAG~P489.00~~~~S34K0VY9P5241109246 89a~Z5Z5Z5~Z5Z5Z50000050x

Bear in mind you will need new stainless door panel inserts (not cheap)...

aworks

I used the kit from CC in my 60. It's been almost five years now and all works fine. It is a bolt in job.

BOB WINSKI

Thanks Guys,I have decided to do a 60 Restomod.Want to start figuring out a budget for it. ''Deep pockets''.Thanks once again.Bob W

semel1

i used the CC ones in my 58 restomod. They work well.

Frankie the Fink

Just curious but where does the operating voltage come from for the power windows with the CC conversion ? Does it come off an existing fuse or do you have to tap directly into battery voltage ? Do the windows operate with the ignition off ?