1966 corvette flywheel
05-20-2011, 11:31 AM
#2
Melting Slicks
According to Joe L. @ NCRS DB site the original flywheel for 427-425 was a 14" diameter w. P/N 3889694. It was drilled for a 11" clutch only. It was discontinued in the early 80s.
The replacement is P/N 3991469. It is drilled for either a 10.5 or 11" clutch.
The replacement is P/N 3991469. It is drilled for either a 10.5 or 11" clutch.
Last edited by Donald #31176; 05-20-2011 at 11:35 AM.
