HELP!!!! info 1957 fi fuel pump
#1
HELP!!!! info 1957 fi fuel pump
Hi needing to know is there a special fuel pump for the 1957 fi corvette can not find any information so ant would be appreciated thanks for your time
#2
Race Director
Since the FI units are almost the same since the 1957 Chevrolet cars, I would say the AC #4656 fuel pump which I have a couple left with the rubber hose could/will be correct
#3
Melting Slicks
Member Since: Feb 2011
Location: Middletown Ohio
Posts: 2,892
Received 167 Likes
on
130 Posts
2016 C1 of Year Finalist
The correct fuel pump used on 57 FI Corvettes is a 4346.
The number is stamped on the edge of the flange the 2 mounting screws go through.
This pump has the long screws holding it together and a "AC" on both the top and bottom.
The number is stamped on the edge of the flange the 2 mounting screws go through.
This pump has the long screws holding it together and a "AC" on both the top and bottom.
Last edited by ohiovet; 04-19-2013 at 11:41 PM.
#4
Race Director
Member Since: Feb 2007
Location: northern california
Posts: 13,610
Received 6,524 Likes
on
3,002 Posts
C2 of Year Finalist (track prepared) 2019
In general what you want is called the "long screw" pump because the pump is held together with very obvious screws of unusual length. It looks very similar to this aftermarket pump:
Inlet and outlet are 180 degrees apart and, for an original pump, are threaded 1/4" FPT.
As the picture suggests you can buy modern replacements which bear a striking similarity to an original '57 FI pump. Google "six valve pump" and you'll see lots of sources. The modern replacements have either 3/8" FPT or 1/2" FPT inlets and outlets.
Jim
Inlet and outlet are 180 degrees apart and, for an original pump, are threaded 1/4" FPT.
As the picture suggests you can buy modern replacements which bear a striking similarity to an original '57 FI pump. Google "six valve pump" and you'll see lots of sources. The modern replacements have either 3/8" FPT or 1/2" FPT inlets and outlets.
Jim