Toggle Switch
#1
Safety Car
Thread Starter
Member Since: Apr 2013
Location: Arlington TX
Posts: 4,833
Received 930 Likes
on
532 Posts
2023 Restomod of the Year Finalist
2023 C1 of the Year Finalist - Unmodified
Toggle Switch
I'm ready to install my electric fan and want to have the option to turn it on with an under dash switch. This may be a dumb question, but in my inventory I have a 125v, 3amp switch. Will that suffice?
#2
Melting Slicks
Electric fans can draw 20-25 amps, if I am correct that is higher than any other circuit in a C2.
Did a lot of that in my cobra for fans, heater, lights, gearbox overdrive, etc. They are very cheap anyway.
#3
Safety Car
Use a relay, and you can use that switch. As Alexander said, most fans will pull 20 or so amps, so if you route it directly through that switch you'll smell plastic burning, right before the fire!!
Mike Coletta
Mike Coletta
#4
Safety Car
Thread Starter
Member Since: Apr 2013
Location: Arlington TX
Posts: 4,833
Received 930 Likes
on
532 Posts
2023 Restomod of the Year Finalist
2023 C1 of the Year Finalist - Unmodified
Yes, sorry, I failed to mention that, I am using the relay supplied with my Spal fan. In using this, how many amps, then, go thru the switch?