64 LS Build W/ Art Morrison Chassis
08-11-2014, 11:03 PM
#101
Advanced
Thread Starter
Member Since: Dec 2013
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
First blocking since first coat of primer better than I expected
Starting to put the flush LED s in for turn signals in the spoiler and rear brake/ tail / Turn lights All flush mount and clear coated under the paint
The rears are in need to be sanded
These are the LED mounts we had to make for front and rear
Had to make fiberglass boxes for the rear will have to glass them into the body
A little glassing of the boxes into the body
A little finish work
Starting to put the flush LED s in for turn signals in the spoiler and rear brake/ tail / Turn lights All flush mount and clear coated under the paint
The rears are in need to be sanded
These are the LED mounts we had to make for front and rear
Had to make fiberglass boxes for the rear will have to glass them into the body
A little glassing of the boxes into the body
A little finish work
12-22-2014, 02:51 PM
#102
Melting Slicks
First blocking since first coat of primer better than I expected
Starting to put the flush LED s in for turn signals in the spoiler and rear brake/ tail / Turn lights All flush mount and clear coated under the paint
The rears are in need to be sanded
These are the LED mounts we had to make for front and rear
Had to make fiberglass boxes for the rear will have to glass them into the body
A little glassing of the boxes into the body
A little finish work
Starting to put the flush LED s in for turn signals in the spoiler and rear brake/ tail / Turn lights All flush mount and clear coated under the paint
The rears are in need to be sanded
These are the LED mounts we had to make for front and rear
Had to make fiberglass boxes for the rear will have to glass them into the body
A little glassing of the boxes into the body
A little finish work
10-12-2015, 11:38 PM
#107
Intermediate
Member Since: Nov 2013
Location: Ohio
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
shaved door handles
I see you shaved the door handles, how are you going to actuate the latch mechanism with the solenoid to release the latch? Looks like a great build
03-31-2016, 09:51 PM
#109
Advanced
Thread Starter
Member Since: Dec 2013
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Wrapping it up for the Lizzard Skin
[URL=http://s1009.photobucket.com/user/Moparden/media/64%20Corvette/imagejpg9_zps622a4d17.jpg.html]
[/URL
Lizzard Skin is on man I like this stuff its a little messy but its great stuff
[URL=http://s1009.photobucket.com/user/Moparden/media/64%20Corvette/imagejpg9_zps622a4d17.jpg.html]
[/URLLizzard Skin is on man I like this stuff its a little messy but its great stuff
