Windshield Tab
#1
Pro
Thread Starter
Windshield Tab
I have a 62 corvette with the windshield out
problem is one of the tabs broke off the pillar post
I called a few vendors to ask if i could buy just the repair tab to have my post repaired here in Canada
Not one would sell the tab only,,,they all want me to ship my post to them for repair,,, that could take up to a couple months
my question
do any of the forum members know where i could purchase the repair tabs only,,, would save me 6 weeks of my car sitting and waiting
i hate the thought of that especially with nice weather finally getting here
so,, if you have the repair tabs,,, or know a vendor who makes them
let me know please
Thx
Steve
problem is one of the tabs broke off the pillar post
I called a few vendors to ask if i could buy just the repair tab to have my post repaired here in Canada
Not one would sell the tab only,,,they all want me to ship my post to them for repair,,, that could take up to a couple months
my question
do any of the forum members know where i could purchase the repair tabs only,,, would save me 6 weeks of my car sitting and waiting
i hate the thought of that especially with nice weather finally getting here
so,, if you have the repair tabs,,, or know a vendor who makes them
let me know please
Thx
Steve
#2
Race Director
Member Since: Nov 2000
Location: Beverly Hills (Pine Ridge) Florida
Posts: 10,152
Received 525 Likes
on
374 Posts
Steve,
I had thought of repairing my tabs, when I found them broken (I have a mill). But after looking at it, decided it was better done by a "professional" who has done them before, and has all the correct fixturing. This was around 2001, and I sent them to Corvette Central, and had then back in a couple of weeks.
They did a terricfic job.
Edit: I had sent the posts off to CC on 11/1/2001, and had the windshield all back on the Vette on 11/19/2001 (including reassembly of the windshield).
See this old thread:
http://forums.corvetteforum.com/c1-a...placement.html
Good luck,
Plasticman
I had thought of repairing my tabs, when I found them broken (I have a mill). But after looking at it, decided it was better done by a "professional" who has done them before, and has all the correct fixturing. This was around 2001, and I sent them to Corvette Central, and had then back in a couple of weeks.
They did a terricfic job.
Edit: I had sent the posts off to CC on 11/1/2001, and had the windshield all back on the Vette on 11/19/2001 (including reassembly of the windshield).
See this old thread:
http://forums.corvetteforum.com/c1-a...placement.html
Good luck,
Plasticman
Last edited by Plasticman; 04-08-2014 at 03:18 PM.
#3
Pro
Thread Starter
Steve,
I had thought of repairing my tabs, when I found them broken. But after looking at it, decided it was better done by a "professional" who has done them before, and has all the correct fixturing. This was around 2001, and I sent them to Corvette Central, and had then back in a couple of weeks.
They did a terricfic job.
Good luck,
Plasticman
I had thought of repairing my tabs, when I found them broken. But after looking at it, decided it was better done by a "professional" who has done them before, and has all the correct fixturing. This was around 2001, and I sent them to Corvette Central, and had then back in a couple of weeks.
They did a terricfic job.
Good luck,
Plasticman
I live in Canada and the cost of shipping back and forth would triple the cost
#4
Team Owner
You could try to contact Paul Mazut and see if he would send you just the tabs (and probably the big screws to secure them: info@paulmazutcorvette.com
Phone # 413-243-3439.
Can't say if he will or won't but you might have better luck with an individual than the big vendors... Let us know what he says.
Phone # 413-243-3439.
Can't say if he will or won't but you might have better luck with an individual than the big vendors... Let us know what he says.
#5
Pro
Thread Starter
You could try to contact Paul Mazut and see if he would send you just the tabs (and probably the big screws to secure them: info@paulmazutcorvette.com
Phone # 413-243-3439.
Can't say if he will or won't but you might have better luck with an individual than the big vendors... Let us know what he says.
Phone # 413-243-3439.
Can't say if he will or won't but you might have better luck with an individual than the big vendors... Let us know what he says.
i called and left a message,,, i will let you know how i make out
#7
Pro
Thread Starter
Forgot all about this thread
Thx to Frankie ,, I got in touch with Paul and had a pair mailed to me
Also arranged to meet Paul at spring Carlisle and bought some grill moldings from him
so things worked out good Thx to the help on this forum