C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

Bendpak 7w vs 9w

Thread Tools
 
Search this Thread
 
Old 07-06-2014, 09:09 PM
  #1  
mrtexas
Drifting
Thread Starter
 
mrtexas's Avatar
 
Member Since: Dec 2009
Location: Sugar Land tx
Posts: 1,388
Received 65 Likes on 50 Posts

Default Bendpak 7w vs 9w

IMHO the bendpak 4 posts are the best out there, so I bought a second one. My 9W would not go high enough to store either woodie on the floor, so the second lift is a 7W. The 7w is available in standard length, 11 inch taller height, and wide width. The 9W requires an additional 20 inches to get the tall height which I didn't want. Even in my very large garage I didn't want the lift taking up another 20 inches in length. 7W is 7,000 capacity and 9W is 9,000 capacity. The lift ramps and posts are the same for both. One thing I did notice today having my Ridgeline pickup on the lift for the first time is that the standard width lift would be too narrow for it.

Here is the 7w lift cylinder


Here is the 9w lift cylinder


Side by side

Last edited by mrtexas; 07-06-2014 at 09:13 PM.
Old 07-06-2014, 10:21 PM
  #2  
Steve439
Le Mans Master
 
Steve439's Avatar
 
Member Since: Oct 2000
Location: Austin TX
Posts: 7,831
Received 5 Likes on 5 Posts

Default

My DD is a Ridgeline.



Quick Reply: Bendpak 7w vs 9w



All times are GMT -4. The time now is 04:49 AM.