The (WTB) Project Files C1/C2
#41
Safety Car
Thread Starter
1965 CORVETTE CONVERTIBLE - $28500 (Phoenix, AZ)
1966 Corvette 427 Coupe 4 speed - $47000 (Clifton)
1965 Corvette convertible. Needs paint and minor body work. Originally red exterior, black vinyl interior. 4 speed. 3:36 posi. 1975 350 cu.in. engine. SS calipers. Rebuilt front suspension. Repacked rear wheel bearings. Completely rebuilt steering column. BF Goodrich TA tires with less than 3,000 miles. New back glass in hardtop. New radiator. New seat covers. New door panels (not on car yet). No cracks in original steering wheel. Nice original dash pads. Have front bumpers and other small exterior and interior parts. I have driven the car 65,000 miles over the last 13 years, just don't have time to finish it. Very dependable driver.
Call Howard for details.
Daytime: 480-898-1900
Nights/ Sundays: 480-705-4255
Call Howard for details.
Daytime: 480-898-1900
Nights/ Sundays: 480-705-4255
1966 Corvette 427 Coupe 4 speed - $47000 (Clifton)
1966 Corvette 427 Coupe 4 speed numbers matching. Needs total restoration. The photos of the 427 cubic inch engine was taken at the rebuilders location, it is not finished yet.
Please refer to photos of vin number and casting numbers to decode.
Asking 46,900 or first reasonable offer. Message me with your phone number if you would like to ask me questions.
Please refer to photos of vin number and casting numbers to decode.
Asking 46,900 or first reasonable offer. Message me with your phone number if you would like to ask me questions.
#42
Melting Slicks
#43
Safety Car
Thread Starter
1963 Corvette - $40000
1964 Corvette for Sale or Trade - $18500 (newton)
1967 Corvette Coupe - $29900 (Ransomville)
1963 Corvette all original with title, serious inquiries, $40,000 obo, call Sherry at 850-699-4405.
1964 Corvette for Sale or Trade - $18500 (newton)
A true barn find this 1964 Corvette stored for 40 years in a nice dry environment, missing seats and odds and ends is ready for a complete restoration. The engine is Not matching #s but is a 327 with hi performance heads and distributor missing carburetor and looking like a 350-365 HP. The engine turns and the frame has some rust at the trailing arms and differential but the rest is in very good condition. The front has disc brakes and power steering though missing the PS pump. The car has side pipes, mag wheels, power windows and convertible top. The vin tag and production tag are missing but have the vin off of the frame. This car is being sold AS IS condition with NO title or registration. I am willing to trade for an XKE or 50's-60's -70's sports car.
1967 Corvette Coupe - $29900 (Ransomville)
1967 Corvette Coupe Project
Car has 32,000 miles. Car is not a big block. Original 327/350 HP. Original 327 Engine is fresh from machine shop.
Matching Numbers. Original 4 speed transmission with numbers that match the vin on the case. Original power steering.
Car is 80% complete. Nice paint that is less than one year old. Body was taken off frame. Frame was painted black.
New dash pad. new windshield and rubber. New fuel tank. Block was bored .030 cleaned new new cam bearings soft plugs.
Rods were magnafluxed and sized. Original steel crank was polished not turned.
Original heads were freshened with new 202 valves, springs, retainers and seals. Original intake was cleaned. New clutch and pressure plate and bearing.
Rally wheels are from a 1973 Corvette. Front bumpers are excellent for rechroming. Nice and straight very little rust inside.
Car needs: headlight motor, wiper motor, wiring harness, fan shroud, carbuerator, front calipers, window chrome,
headliner, interior trim pieces, radio, clock, and seat belts.
Car will be really sharp when finished. Email if have questions.
Car has 32,000 miles. Car is not a big block. Original 327/350 HP. Original 327 Engine is fresh from machine shop.
Matching Numbers. Original 4 speed transmission with numbers that match the vin on the case. Original power steering.
Car is 80% complete. Nice paint that is less than one year old. Body was taken off frame. Frame was painted black.
New dash pad. new windshield and rubber. New fuel tank. Block was bored .030 cleaned new new cam bearings soft plugs.
Rods were magnafluxed and sized. Original steel crank was polished not turned.
Original heads were freshened with new 202 valves, springs, retainers and seals. Original intake was cleaned. New clutch and pressure plate and bearing.
Rally wheels are from a 1973 Corvette. Front bumpers are excellent for rechroming. Nice and straight very little rust inside.
Car needs: headlight motor, wiper motor, wiring harness, fan shroud, carbuerator, front calipers, window chrome,
headliner, interior trim pieces, radio, clock, and seat belts.
Car will be really sharp when finished. Email if have questions.
#44
Team Owner
Member Since: Aug 2008
Location: Rochester NY
Posts: 31,358
Received 5,010 Likes
on
2,529 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
The vin tag and production tag are missing but have the vin off of the frame. This car is being sold AS IS condition with NO title or registration.
#45
Safety Car
Thread Starter
1958 Corvette Convertible - $27000 (silverlake)
1958 Corvette Convertible. Needs restoration. Has a new 350 engine. I have all of the parts and receipts, it does need the right front bumper. Family member is sick so I can't continue working on her. I have 30k into it at this point. Its at a body shop and its almost ready to paint. The original color was red with a white inert and red interior. This is a perfect car to make it any color you want at this point. Asking $27,000. Please call me at 323 559 522five. Thx
1960 Corvette - $35500 (Ellsworth Mi.)
1960 Corvette. 2 tops. Sitting inside since mid 70s. Wrong 283. Motor stuck. Turns a little bit. Has oil in cylinders. Good body. Decent frame. Small rust thru on pass. side before rear wheel (shown in pics). Easy fix. Rest of frame nice. White floors. Chrome and stainless all there. Nice dash pad and gauges. WonderBar radio. Wrong shifter of course. Carpet will clean up. Door panels fair. Needs seat covers. Mainly complete car. Shows 80,000 miles. Good title and VIN tag. $35,500. (231)631-0235
#46
Safety Car
Thread Starter
Here is one that has been for sale for a while... its probably overpriced for a 63 Convert that needs a lot, but maybe time has tempered the sellers expectation.
Anyone been to check it out? If so, care to comment?
1963 Corvette Stingray roadster - $35000
Anyone been to check it out? If so, care to comment?
1963 Corvette Stingray roadster - $35000
Very good body and int. Incorrect 1965 327-365 engine with Muncie 4 spd. 4:11 posi-rear. Last time painted was in 1966. Needs restoration.
#47
Safety Car
Thread Starter
Split Projects Don't Come up too often...
1963 Corvette Split Window Coupe - $26800 (Westminster,Md)
1963 Corvette Split Window Coupe - $26800 (Westminster,Md)
Nice clean body and frame with a new professionally installed front end. Clean glass. Good interior rear window moldings, Rebuilt steering column and clutch and bake pedals. Have title
#48
Safety Car
Thread Starter
1962 Corvette PROJECT - $27500 (Cocoa Fl)
1961 corvette $35K NJ
1966 Corvette big block project car - $33000 WA (Yakima)
1962 Corvette Project car - $24500 Cleveland OH
Last edited by Revfan; 02-12-2015 at 08:16 AM.
#49
Instructor
I REALLY dig this car... which is ironic cause there was a time when I didn't care much for non stock stuff. If I had the dough, I'd be on this "like a hobo on a ham sandwich!"
1966 Corvette Coupe - $35000 (Bluff City)
1966 Corvette Coupe - $35000 (Bluff City)
#50
Safety Car
Thread Starter
Rickenback
I dunno... when the link was active, I sent an e-mail to the owner but never got a response.
He lists it ever so often, I'll keep my eyes open and let you know
I dunno... when the link was active, I sent an e-mail to the owner but never got a response.
He lists it ever so often, I'll keep my eyes open and let you know
#52
Safety Car
Thread Starter
65 corvette wanting to trade for newer camaro - $24000 (Skagit)
I have a 65 corvette hard top convertible 4 speed, has the big block hood with it. I took it apart ready for paint no time to finish it. Willing to trade for older camaro or newer camaro or trade other things also. What you got? I'm asking 24,000.00 for this. The car is all there.
motor is not included will be another 4,000.00 for the motor. motor is brand new 383 stroker 465 hp dyno sheets.
text or email. three 60-four21-four109
motor is not included will be another 4,000.00 for the motor. motor is brand new 383 stroker 465 hp dyno sheets.
text or email. three 60-four21-four109
#54
Drifting
have you seen the car?
Russ
#56
Le Mans Master
Member Since: Feb 2004
Location: Norcal CA
Posts: 6,717
Received 551 Likes
on
444 Posts
2018 C1 of Year Finalist
Title?
Also, he can call me if needed. I am not interest in another project until mine is completely finished.
#58
Le Mans Master
Member Since: Feb 2004
Location: Norcal CA
Posts: 6,717
Received 551 Likes
on
444 Posts
2018 C1 of Year Finalist
Here is a 1957 which I have seen in person. Really this is a full project car and in my opinion they are asking too much... 30k tops!
http://sacramento.craigslist.org/cto/4905879347.html
http://sacramento.craigslist.org/cto/4905879347.html
#59
Safety Car
Thread Starter
hmmmm.....
1958 Corvette - $23000 (Medford, OR)
1964 Corvette Convertible - $25000 (St. Albans, VT)
1958 Corvette - $23000 (Medford, OR)
For sale is my 1958 Corvette project car that spent many years as a vintage drag car and would make an excellent hot rod or gasser. It has an Oregon title with current Oregon registered plates. The original numbers matching frame also goes with the vehicle, although the front suspension and frame has been cut off. The Corvette body is now on a 1957 Corvette chassis (from a resto-mod makeover) that includes a newer exhaust system, brake lines and cylinders. The engine is a 1957- 283 cubic inch, casting (#GM 3731548), and has approximately 5000 miles on it since being rebuilt. The carburetors are 1957 Carter WCFB (body casting #0-108), but not numbers matching for a duel carburetor set-up. The front suspension is 1957, but the positrac rear differential (B244, #3789812) and the T-10 4-speed (T10-1C, #3782212) are both from a 1961 Corvette. The car comes with numerous used corvette parts. Included are bumpers, grill, moldings (not all), seats, gauges, hard top, radiator, steering column, clutch brake pedals, rear lights, gas tank (needs dipping), exhaust system, mirrors and other miscellaneous parts. The 1958 fiberglass hood has been cut to accommodate a blower motor / tunnel ram from times past. The fiberglass body does show signs of its vintage heritage and is in need of restoration in various areas. Filling cracks, repairing small fiberglass chipped pieces and reinforcing brittle areas would be necessary to ensure a sound foundation. Although it will have tires and wheels (rollers), the tires and wheels in photos do not go with the vehicle; but they may be negotiable. This project car would be an excellent candidate for a "hands on" car enthusiast to finish at his leisure and enjoy the journey of building a true American classic. $23,000 OBO
1964 Corvette Convertible - $25000 (St. Albans, VT)
1964 Corvette Convertible matching numbers needs restoration. Both tops. Power windows and brakes. Many parts included to complete restoration. Asking $25,000. No trades. No low ballers. No scammers!! Will not respond to email. Cell phone only!
#60
Safety Car
Thread Starter
1958 Corvette - $25000 (Huntington)
Very complete car.
N.O.M.
3 speed transmission.
Needs complete frame off restoration
N.O.M.
3 speed transmission.
Needs complete frame off restoration
1959 Corvette - $17500 (Huntington)
Nice straight body on rolling chassis.
No drive train, chrome, or interior.
Good Title.
Rear wheel wells cut out of trunk.
Extra tail clip included with rear wheel wells intact.
No drive train, chrome, or interior.
Good Title.
Rear wheel wells cut out of trunk.
Extra tail clip included with rear wheel wells intact.
1959 Corvette - $22000 (Huntington)
Very nice straight body on excellent solid rolling chassis.
Non Original Motor.
4 bolt block.
Three, two barrel carburetors (Tripower).
3 speed transmission.
Windshield, chassis, door posts, and rear bumpers all good and intact.
No other chrome.
No interior.
Non Original Motor.
4 bolt block.
Three, two barrel carburetors (Tripower).
3 speed transmission.
Windshield, chassis, door posts, and rear bumpers all good and intact.
No other chrome.
No interior.