S. OH 327 specialist wanted!
11-19-2014, 11:34 AM
#1
Instructor
Thread Starter
S. OH 327 specialist wanted!
I'm seeking the best Corvette engine shop in the southern Ohio area to tune my '65 327/365. My CF friends will know who the guru is!
11-19-2014, 03:59 PM
#2
Le Mans Master
If Bob Fall is still in business in Northern Ohio he is very good. Not saying he is the best but I knew him and he was honest and good. Bob used to teach Engine Rebuilding for Clevite and Sealed Power before opening his shop. Bob Fall Machine Bob may have retired by now.
11-19-2014, 04:17 PM
#3
Race Director
Member Since: Jan 2002
Location: Close to DC
Posts: 14,561
Received 2,138 Likes
on
1,473 Posts
C2 of the Year Finalist - Modified 2020
FWIW...Send your distributor and Holley carb to Lars...NO ONE better for rebuilding and calibrating. Buy correct plugs, wires install them yourself. When you get the carb and dist back install. There is plenty of info in the "Sticky" section under C-1/C-2 FAQ. You can do this! 
Dennis
Dennis
11-19-2014, 04:56 PM
#4
Instructor
Thread Starter
If Bob Fall is still in business in Northern Ohio he is very good. Not saying he is the best but I knew him and he was honest and good. Bob used to teach Engine Rebuilding for Clevite and Sealed Power before opening his shop. Bob Fall Machine Bob may have retired by now.
419) 473-1557Thanks for the tip!
11-19-2014, 04:59 PM
#5
Instructor
Thread Starter
FWIW...Send your distributor and Holley carb to Lars...NO ONE better for rebuilding and calibrating. Buy correct plugs, wires install them yourself. When you get the carb and dist back install. There is plenty of info in the "Sticky" section under C-1/C-2 FAQ. You can do this! Dennis
DennisThanks for your advice!
