0kdumph

Seems there is a good amount of interest in these so I'll go ahead and put this out there.
I custom pick the wood (or Acrylic), design from scratch, draw, and then engrave and paint fill. I finish it up with a metal frame, hangers and wire. It takes me an average of 2-3 weeks from design to shipping.

The wood pcs start at 400 and the acrylic pcs start at 325 (I have white acrylic as well that we can paint fill the engraving black). This includes your choice for the metal frame, stain color if we go with wood, shipping in the US, and of course as many proofs as it takes to get the design right. The pcs are 24”X18” plus or minus an inch with the frame and how the woodworking turns out.

Suggestions and input are always welcome and helpful to me! We can do any kind of customization from wood type to different designs.

These really will make your garage/office/living room standout! Or use it to put on display at shows.

Shoot me a PM or email to get started!

0kdumph

Alright guys, just finished this one up. Little bit of a different layout, but I love how it turned out! What do you guys think?

0kdumph

Have a look at this beauty guys, I think this is probably my favorite piece so far! Glad the member was willing to try white!

0kdumph

Here is a members with a Z06 Grill on it.

ChattanoogaJSB

Hey- OP- those are pretty cool, it's amazing how much detail you can lay out and finish nicely.

JackTripper

How much for a C7 Z06/Z07 one?

0kdumph

Hey guys thanks for the kind comments. I like uncovered cars too, but I never seem to be able to fit them into my office or den...

JackTripper, I shot you a PM!

Also have a look at this newest print I'm working on. Not sure how I'm going to price these, but will be available in various sizes and I can do commission work for just about any car!

sub006

Beautiful. In this section there would be great interest in 1953 through 1967 models also.

Mike Terry

I agree, why is this guy showing the C1 & C2 guys like us the New Car stuff? I am like you I would rather see the early stuff in my den or garage on the walls. I never did see a price. How much is something like the white one engraved but with C2 info and drawings?

0kdumph

Working on it guys. I have a L88 drawing in the works and some split window stuff. Give me a little bit of time!

0kdumph

Hey guys I'm going to run a sale on these, as I haven't even paid off the cost to be a sponsor here yet.

250.00 for a piece that is engraved on either white or black acrylic. This includes the custom drawing, frame, and shipping.

325.00 for a wood alder piece with your choose of stain color, custom drawing, frame and shipping.

*** I custom draw each of these, if you have a photo of your car we can use that***