C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

Posi Additive

Thread Tools
 
Search this Thread
 
Old 05-24-2016, 06:59 PM
  #1  
65tripleblack
Safety Car
Thread Starter
 
65tripleblack's Avatar
 
Member Since: May 2003
Location: Ocean Township NJ
Posts: 4,797
Received 235 Likes on 212 Posts

Default Posi Additive

How many ounces?
Calls for 2 bottles so is that 8 oz.
Old 05-24-2016, 07:22 PM
  #2  
1snake
Le Mans Master
 
1snake's Avatar
 
Member Since: Dec 2007
Location: Puget Sound
Posts: 8,000
Received 652 Likes on 446 Posts

Default

Yes.
Old 05-24-2016, 09:19 PM
  #3  
wmf62
Race Director
 
wmf62's Avatar
 
Member Since: Jun 2006
Location: Inverness FL
Posts: 17,891
Received 727 Likes on 621 Posts
St. Jude Donor '07

Default

I use 2...
Bill
Old 05-25-2016, 09:10 AM
  #4  
65tripleblack
Safety Car
Thread Starter
 
65tripleblack's Avatar
 
Member Since: May 2003
Location: Ocean Township NJ
Posts: 4,797
Received 235 Likes on 212 Posts

Default

Thank you.
I have 2 full 7 ounce tubes of "Equa Torque" posi additive. I also have another open tube, so I'll use a full 8 ounces and return one tube of "Equa Torque".

Last edited by 65tripleblack; 05-25-2016 at 09:11 AM.
Old 05-25-2016, 09:38 AM
  #5  
Frankie the Fink
Team Owner

 
Frankie the Fink's Avatar
 
Member Since: Aug 2007
Posts: 58,062
Received 7,082 Likes on 4,736 Posts
Army

Default

I added 2 bottles to my '63s posi after changing the rear end fluid since it sat on a lift for 4 years. I then cut a bunch of left/right figure-8s in a parking lot to get things juiced up real good...
Old 05-25-2016, 09:50 AM
  #6  
65tripleblack
Safety Car
Thread Starter
 
65tripleblack's Avatar
 
Member Since: May 2003
Location: Ocean Township NJ
Posts: 4,797
Received 235 Likes on 212 Posts

Default

Originally Posted by Frankie the Fink
I added 2 bottles to my '63s posi after changing the rear end fluid since it sat on a lift for 4 years. I then cut a bunch of left/right figure-8s in a parking lot to get things juiced up real good...
Well, I put in new solid steel clutches to replace the old "snowflake" steel type. I also eliminated the preload springs and tuned the posi per Tom's instructions. It is TIGHT.
And, as we all know: 'There's nothin' like a tight possy".

Lotto figure eights are planned to further wear in the new clutches and get the additive between all the plates and disks.

Get notified of new replies

To Posi Additive




Quick Reply: Posi Additive



All times are GMT -4. The time now is 05:41 AM.