Renwaltoys

I bought a set of of inspection stickers (3,7) for my 65 small block aluminum radiator and expansion bottle. Could anyone provide an accurate description for the placement of these stickers. Does the 3 go on the expansion tank and the 7 on the radiator? If so where. A picture would be great but that is a lot to ask. Thanking you guys in advance for your help, Duke

65hihp

I don't think this is hard and fast, however, in the new NCRS Judging Guide for 1965 cars photos show the 7 on the top of the radiator on the left side, to the right of the hose inlet fitting. Chassis Pg. 201
And the 3 is on the front of the Harrison expansion tank to the right of the word Harrison. Chassis Pg. 205

R66

How do you identify the correct expansion tank and radiator? R66 has a Harrison expansion tank but the radiator appears to have been replaced. After 50 years, I am amazed at what has not been replaced.

Thanks
Ron

65hihp

We look for the near perfect DeWitts reproduction aluminum radiator with part no. 3155316 and date, and the near perfect reproduction burp tank with part no. 3155416 and date.

66jack

Go to post #5...there's a PDF that has decal placement locations and descriptions...

https://www.corvetteforum.com/forums...questions.html