[C2] Last year for PCV vent tube from block to air cleaner?
10-28-2016, 03:24 PM
#1
Drifting
Thread Starter
Last year for PCV vent tube from block to air cleaner?
Hi. What would be the last year for the metal pcv vent tube from the engine block to the air cleaner?
327 or 350. I am looking for an old-style block with the PCV vent to hook up.
327 or 350. I am looking for an old-style block with the PCV vent to hook up.
Last edited by DSR; 10-28-2016 at 03:27 PM.
10-28-2016, 04:01 PM
#2
Team Owner
Member Since: Mar 2003
Location: Greenville, Indiana
Posts: 26,118
Received 1,843 Likes
on
1,398 Posts
1967 was the last production line year for the vent hole in the block. At least one later service replacement block was released for that usage. Somebody here can give you the casting number.
10-28-2016, 04:12 PM
#3
Drifting
Thread Starter
Thanks Mike
10-28-2016, 04:20 PM
#4
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,003
Received 6,943 Likes
on
4,782 Posts
2015 C2 of Year Finalist
Mike was the 350 used in the 67 Camaro use the PCV in the back of the block
10-28-2016, 04:28 PM
#5
Team Owner
Member Since: Mar 2003
Location: Greenville, Indiana
Posts: 26,118
Received 1,843 Likes
on
1,398 Posts
Yes.
PS. Some leftover '67 engines were used in early production '68 pass cars and they had the vent hole in the block. Different block though than the '67 302, 327 and 350.
PS. Some leftover '67 engines were used in early production '68 pass cars and they had the vent hole in the block. Different block though than the '67 302, 327 and 350.
Last edited by MikeM; 10-28-2016 at 04:30 PM.