1957 inner reveal molding fasteners
#1
1957 inner reveal molding fasteners
Hi,
I am putting the moldings back on my 1957 Vette. I have located all the clips and fasteners except the inner reveal molding on the inside of the door. Does anyone know who can supply the clips and fasteners that I will need to attach this molding. Ecklers, Corvette Central, Keens, Zip don't seem to have it. Any help will be appreciated.
Thanks,
Pat
I am putting the moldings back on my 1957 Vette. I have located all the clips and fasteners except the inner reveal molding on the inside of the door. Does anyone know who can supply the clips and fasteners that I will need to attach this molding. Ecklers, Corvette Central, Keens, Zip don't seem to have it. Any help will be appreciated.
Thanks,
Pat
#3
Burning Brakes
I used plastic push pins from Home Depot. The top looks like a golf ball marker and you can get a size to fit inside the cove molding. The stem is serrated and fit the holes perfectly. I used a rubber hammer and something to spread the impact so as not to bend or dimple the trim.
It has worked great for me. Much better then the stock type fasteners and has been on for over ten years with no problems.
Larry
It has worked great for me. Much better then the stock type fasteners and has been on for over ten years with no problems.
Larry
The following users liked this post:
Moleyman (12-02-2016)
#5
Instructor
#7