Source for wiring connectors
12-05-2016, 09:43 PM
#21
Advanced
Thread Starter
The connectors you are looking for are Packard (Delphi) 56 series. This place has them and just about anything else except the twin locks.
https://theelectricaldepot.com/weath...9d3de982455198
.
https://theelectricaldepot.com/weath...9d3de982455198
.
That's the problem I'm having. They might be them but are they for 1/4 inch or 3/16 inch blade connectors. The connectors on the ignition switch for example. It doesn't specify. And I still need the two wire terminal. I don't think they use a 12 awg connector for two smaller wires. I didn't want to call someone without knowing what to ask for but that might be what I have too do.
12-06-2016, 12:26 AM
#22
Except for a few connectors on the back side of the fuse panel, all the connectors in the dash harness are either Twin Locks or Packard 56, which only come in one size which is 1/4" spade male and 1/4" female.
The following users liked this post:
marshal135 (12-14-2021)
Yes, very Helpful.