Radio repair tag from 10/4/88.Customer Greg Maxwell?
#1
Pro
Thread Starter
Radio repair tag from 10/4/88.Customer Greg Maxwell?
Anyone know Greg Maxwell? Located this tag attached to my radio, I was removing the console today and found this tag. Greg was the customer who had it repaired back in 1988. My trail of ownership gets back to 1989 at this point. This might help me get back a little further. Thx, Chuck
#2
Team Owner
Member Since: Aug 2008
Location: Rochester NY
Posts: 31,358
Received 5,010 Likes
on
2,529 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
Any possible location or general part of the country it might be from? That's got to be a pretty common name, but I do know of one person. The guy would have had the means to own a Vette, too.
Edit: I see you are from the Albany NY area. I don't want to get your hopes up but there was a Greg Maxwell who was President of the Delaware & Hudson Railroad in the 1970's - and the D&H was headquartered in Albany! I have some inquiries out and will let you know if they pan out.
Edit: I see you are from the Albany NY area. I don't want to get your hopes up but there was a Greg Maxwell who was President of the Delaware & Hudson Railroad in the 1970's - and the D&H was headquartered in Albany! I have some inquiries out and will let you know if they pan out.
Last edited by Railroadman; 01-07-2017 at 09:00 PM.
The following users liked this post:
Sullyvette (01-07-2017)
#5
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,009
Received 6,943 Likes
on
4,782 Posts
2015 C2 of Year Finalist
Whitepages.com. Start searching names and location of last known location. If you feel brave you can call them if you find matches
The following users liked this post:
Sullyvette (01-07-2017)
The following users liked this post:
Sullyvette (01-07-2017)
#7
Pro
Thread Starter
I've talked to the 85 year old owner of J&N in Kansas. What a guy, very interesting. Big Trump supporter !!! A local Police Chief assisted me in locating the shop owner. (Professional courtesy). He was helpful as to what he did with the engine back then. I thought a replacement block had been installed, but he advised me that he blueprinted, bored are reinstalled the original motor. Due to someone changing the auto transmission to a 4spd. somewhere along the line. There was some confusion at the start of my search. I'm convinced now that I have the original motor. #'s match my VIN plate. Thanks for all the tips.
#9
Team Owner
Member Since: Aug 2008
Location: Rochester NY
Posts: 31,358
Received 5,010 Likes
on
2,529 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
OK, if it was in Kansas at that time, we can eliminate the man by that name I was thinking of who would have been in the Albany NY area. Oh well!
The following users liked this post:
Sullyvette (04-29-2017)