18- 461 heads, 4- 462 heads, 3- 291 heads, 1-292 head, 5-492 heads, 2- 186 heads
09-04-2008, 04:31 PM
#21
Le Mans Master
ttt for a gentleman.
chuck
chuck
10-05-2008, 01:11 PM
#22
1st Gear
Member Since: Oct 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i just bought a race car motor with a match set of turbo heads with #49 and 50 on them and have been trying to figure out what they went to as well as the flow data on them any ideas please email them to me at:
pepe1352@hotmail.com
thank you,
danny
pepe1352@hotmail.com
thank you,
danny
11-23-2009, 09:41 PM
#26
1st Gear
Member Since: Nov 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Offers Considered!
These are all bare, magnafluxed, hot tanked and rebuildable, assorted dates. 20 year collection. Buyer responsible for shipping costs.
Guess the easiest way to do this is post the month, year. Here they are.
461 Heads.
1962 Castings $200 Each
B 2 SOLD!
C 2 SOLD!
No 1963 castings
1964 Castings $150 Each
C 4
F 4
H 4
L 4
1965 Castings $150 Each
A 5
D 5
D 5
E 5 SOLD!
E 5 SOLD!
E 5
E 5
H 5
J 5
J 5
K 5
1966 Casting dates $150 Each
B 6
462 Heads $200 Each
1966 Casting Dates
C 6
F 6
F 6
1967 Casting Dates
B 7
291 heads $200 Each
E 7
F 7
I 7
186 heads $200 Each
H 8
A 0
340292 was available from GM "over the counter". This version had angle plug configuration, 2.02/1.60" valves, 64CC combustion chambers. These were known as the "Turbo" heads. I have one of these. They are very rare. Date G 5 $400
"492" – 3991492. Another good performance head. They were found on 1970 LT-1 engines. They had 2.02/1.60" valves, 64CC combustion chambers, DO have accessory holes, intake port volume should be 161CC's, exhaust port volume should be 62CC's. These heads have double hump casting marks. This particular casting head was also available as an "over the counter" head from GM in straight or angle plug configurations.
3991492 Heads
H 1 $200
E 3 Set $400
E 3
Y 3 Set $400
Y 3
These are all bare, magnafluxed, hot tanked and rebuildable, assorted dates. 20 year collection. Buyer responsible for shipping costs.
Guess the easiest way to do this is post the month, year. Here they are.
461 Heads.
1962 Castings $200 Each
B 2 SOLD!
C 2 SOLD!
No 1963 castings
1964 Castings $150 Each
C 4
F 4
H 4
L 4
1965 Castings $150 Each
A 5
D 5
D 5
E 5 SOLD!
E 5 SOLD!
E 5
E 5
H 5
J 5
J 5
K 5
1966 Casting dates $150 Each
B 6
462 Heads $200 Each
1966 Casting Dates
C 6
F 6
F 6
1967 Casting Dates
B 7
291 heads $200 Each
E 7
F 7
I 7
186 heads $200 Each
H 8
A 0
340292 was available from GM "over the counter". This version had angle plug configuration, 2.02/1.60" valves, 64CC combustion chambers. These were known as the "Turbo" heads. I have one of these. They are very rare. Date G 5 $400
"492" – 3991492. Another good performance head. They were found on 1970 LT-1 engines. They had 2.02/1.60" valves, 64CC combustion chambers, DO have accessory holes, intake port volume should be 161CC's, exhaust port volume should be 62CC's. These heads have double hump casting marks. This particular casting head was also available as an "over the counter" head from GM in straight or angle plug configurations.
3991492 Heads
H 1 $200
E 3 Set $400
E 3
Y 3 Set $400
Y 3
