(F/S) C2 & C3 Parts {CA}
03-24-2008, 12:31 PM
#1
Instructor
Thread Starter
Member Since: Jan 2006
Location: SAN DIEGO CA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
(F/S) C2 & C3 Parts {CA}
PM me for info and pictures ....
I have the following parts available, most of which were removed from or purchased for my '66 & Corvette racecars.
Prices DO NOT INCLUDE SHIPPING.
I have pictures of all items, which I can forward to you.
Located in San Diego, CA.
Well Built 355ci engine (425hp), 10.5 compression, all block work performed, reworked and flowed Bowtie aluminum heads, matched Victor Jr intake, roller cam, complete except for carb and the roller rockers. Professionally built. It has been sitting and was the a back up motor for my Corvette racecars (road race/autocross) $2200 plus shipping. OBO
Muncie all-alloy 4-spd transmission, Completely Rebuilt w/new parts, complete, close-ratio, fine spline, HD parts w/Hurst Quick shifter w/reverse lockout, $900.
Differential 4.11 posi, Completely Rebuilt w/new parts, complete w/yokes and power coated cover, $800.
CSR Billet Aluminum Electric Water Pump (NEW) Blue Anodized, Part# 901B, Cost $280
F/S - $190
Stock Front upper and lower suspension A-arms.
Stock 5-leaf rear spring,
Front coil spring sets, 500lb, 600lb, $25 a set
2 used tail lights, 2 half shafts
8-track AM/FM Radio from a C3. $50
S/B Offenhauser Dual-port Intake manifold,
(2) Edelbrock s/b chrome valve covers w/K&N breathers, $50
(2) Chevrolet s/b chrome valve covers w/breathers, $45
68-74 Rear deck rack,
(2) Bass Racing Professional Aluminum Scale Platforms $200 SOLD
I have the following parts available, most of which were removed from or purchased for my '66 & Corvette racecars.
Prices DO NOT INCLUDE SHIPPING.
I have pictures of all items, which I can forward to you.
Located in San Diego, CA.
Well Built 355ci engine (425hp), 10.5 compression, all block work performed, reworked and flowed Bowtie aluminum heads, matched Victor Jr intake, roller cam, complete except for carb and the roller rockers. Professionally built. It has been sitting and was the a back up motor for my Corvette racecars (road race/autocross) $2200 plus shipping. OBO
Muncie all-alloy 4-spd transmission, Completely Rebuilt w/new parts, complete, close-ratio, fine spline, HD parts w/Hurst Quick shifter w/reverse lockout, $900.
Differential 4.11 posi, Completely Rebuilt w/new parts, complete w/yokes and power coated cover, $800.
CSR Billet Aluminum Electric Water Pump (NEW) Blue Anodized, Part# 901B, Cost $280
F/S - $190
Stock Front upper and lower suspension A-arms.
Stock 5-leaf rear spring,
Front coil spring sets, 500lb, 600lb, $25 a set
2 used tail lights, 2 half shafts
8-track AM/FM Radio from a C3. $50
S/B Offenhauser Dual-port Intake manifold,
(2) Edelbrock s/b chrome valve covers w/K&N breathers, $50
(2) Chevrolet s/b chrome valve covers w/breathers, $45
68-74 Rear deck rack,
(2) Bass Racing Professional Aluminum Scale Platforms $200 SOLD
Last edited by rp.bp89; 04-15-2008 at 03:36 PM. Reason: Some sold, some added
04-15-2008, 04:31 PM
#4
Burning Brakes
Member Since: Jan 2006
Location: NC
Posts: 1,072
Received 167 Likes
on
63 Posts
2022 C2 of the Year Finalist - Modified
GUYS
I PURCHASED SOME PARTS FROM RICK AND THEY WERE JUST AS DESCRIBED AND SHIPPED QUICKLY FROM ONE COAST TO THE OTHER.
GOOD SELLER!!
THANKS RICK
BILL SR
I PURCHASED SOME PARTS FROM RICK AND THEY WERE JUST AS DESCRIBED AND SHIPPED QUICKLY FROM ONE COAST TO THE OTHER.
GOOD SELLER!!
THANKS RICK
BILL SR
