C1 and C2 FI units and parts for sale
04-02-2011, 04:07 PM
#1
Former Vendor
Thread Starter
C1 and C2 FI units and parts for sale
Please view photos here. Very many detailed photos.
http://smg.photobucket.com/albums/v6...el%20injection
Please see all detailed photos of this unit at the top photobucket link.
August 1, 2011 update on sold items:
The '59 FI car is sold.---$22K---no engine or trans
SOLD---The '64 FI car is sold.---$24K---Minus FI set-up, hard top, (Hard top is SOLD)
Have the original FI set up and original FI radiator support.
SOLD---The '58ish passenger car FI air cleaner is sold.---$500.00
SOLD---The Kent Moore Manometer is sold.---$600.00
SOLD---The '63 air cleaner (bare steel) is sold.---$2,500.00 (primed and added a fresh air hose to the deal)
SOLD---The restored 7320 with air cleaner is SOLD---- $7K---Included oil cap, shielding, tach cable, pedal linkage and thermostat housing
SOLD---The '63-'65 air cleaner assembly with "S" tube is SOLD--$2,800.00 shipped.
Please look at all of the photos of this '65 unit in the photobucket link. This is a $12K to $15k set-up from the "Big Boy" restorers/retailers.
SOLD--'65 380 unit with distributor, air cleaner, and "S" tube. ------- Air cleaner assembly is SOLD.
SOLD---FI unit with distributor-----$7,500.00
SOLD---Air cleaner and "S" tube--- $2,800.00---SOLD
Exhaust manifolds---------$ 450.00---These are reproductions
Sold---'58 (4900R) with dist.----some polishing---$4,600.00--Sold
SOLD---'60/'61 (7320) with dist.----no polishing, no chroming---- --------------------------------------------------------------------------$4,000.00--SOLD
This unit is pending, have a couple of members interested in the '60 big brake car and this unit will go with the deal.
SOLD---'63, (7375) with dist. ----some polishing and chroming--------------------------------------------------------------------------$5,500.00---SOLD
SOLD--SOLD-- this air cleaner assembly is sold---matching '63 original air cleaner with "S" tube---bare steel, ready for paint and decal------------------------------------$2,800.00---SOLD
'64 (7380) Late production, can be used on a '65. This unit is currently installed on my '64 FI vert and it screams (pulls 7,000 rpm in a heartbeat. I've had it on this car for 10 years and have yet had to adjust it---just fire up and go every time. This unit has an 1111070 points distributor and a couple of the plenum legs have been welded. --------------------------------------------------$5,000.00
'64 (7380) with distributor. Original unit, nice condition, no chroming or polishing.-----------------------------------------$6,500.00
Hundreds of rebuild parts,------gaskets, diaphragms, gasket kits, spill valves, nozzle blocks, cranking signal valve, air exchange tubes, throttle linkage pieces, choke pieces, screws/bolts, spider tubing and compression sleeves, etc.--------------$500.00
SOLD----Kent Moore manometer with mercury------------------------------------------------------------------------------------------------$ 550.00---SOLD
'57 548 short block (real Flint block)--(L 26 6), built to FI 283 HP specs-----------------------------------------------------------------------------$ 800.00
This is a very nice, rebuilt, ready to go short block.
SOLD---SOLD---'57 passenger car FI air cleaner-------------------------------------------------------------------------------------------------------$ 500.00
SOLD---$7K---I have another '60 (7320) unit complete with distributor and original air cleaner. This unit is restored (Tom Parsons). and never installed. This unit belongs to my '60 big brake fuel car. It's likely that I will not find/purchase the big brake parts missing from my car (5 1/2" wheels, finned drums, and front vented backing plates), so I will sell this complete unit for an additional $5,000.00 to anyone who purchases everything listed above.---SOLD--$7K--
Sold----The '60 FI big brake car is for sale---Sold
SOLD---'65 FI cp is for sale---Please inquire---SOLD
Considering all offers.
George
210 748 4693
geopar@gvtc.com
http://smg.photobucket.com/albums/v6...el%20injection
Please see all detailed photos of this unit at the top photobucket link.
August 1, 2011 update on sold items:
The '59 FI car is sold.---$22K---no engine or trans
SOLD---The '64 FI car is sold.---$24K---Minus FI set-up, hard top, (Hard top is SOLD)
Have the original FI set up and original FI radiator support.
SOLD---The '58ish passenger car FI air cleaner is sold.---$500.00
SOLD---The Kent Moore Manometer is sold.---$600.00
SOLD---The '63 air cleaner (bare steel) is sold.---$2,500.00 (primed and added a fresh air hose to the deal)
SOLD---The restored 7320 with air cleaner is SOLD---- $7K---Included oil cap, shielding, tach cable, pedal linkage and thermostat housing
SOLD---The '63-'65 air cleaner assembly with "S" tube is SOLD--$2,800.00 shipped.
Please look at all of the photos of this '65 unit in the photobucket link. This is a $12K to $15k set-up from the "Big Boy" restorers/retailers.
SOLD--'65 380 unit with distributor, air cleaner, and "S" tube. ------- Air cleaner assembly is SOLD.
SOLD---FI unit with distributor-----$7,500.00
SOLD---Air cleaner and "S" tube--- $2,800.00---SOLD
Exhaust manifolds---------$ 450.00---These are reproductions
Sold---'58 (4900R) with dist.----some polishing---$4,600.00--Sold
SOLD---'60/'61 (7320) with dist.----no polishing, no chroming---- --------------------------------------------------------------------------$4,000.00--SOLD
This unit is pending, have a couple of members interested in the '60 big brake car and this unit will go with the deal.
SOLD---'63, (7375) with dist. ----some polishing and chroming--------------------------------------------------------------------------$5,500.00---SOLD
SOLD--SOLD-- this air cleaner assembly is sold---matching '63 original air cleaner with "S" tube---bare steel, ready for paint and decal------------------------------------$2,800.00---SOLD
'64 (7380) Late production, can be used on a '65. This unit is currently installed on my '64 FI vert and it screams (pulls 7,000 rpm in a heartbeat. I've had it on this car for 10 years and have yet had to adjust it---just fire up and go every time. This unit has an 1111070 points distributor and a couple of the plenum legs have been welded. --------------------------------------------------$5,000.00
'64 (7380) with distributor. Original unit, nice condition, no chroming or polishing.-----------------------------------------$6,500.00
Hundreds of rebuild parts,------gaskets, diaphragms, gasket kits, spill valves, nozzle blocks, cranking signal valve, air exchange tubes, throttle linkage pieces, choke pieces, screws/bolts, spider tubing and compression sleeves, etc.--------------$500.00
SOLD----Kent Moore manometer with mercury------------------------------------------------------------------------------------------------$ 550.00---SOLD
'57 548 short block (real Flint block)--(L 26 6), built to FI 283 HP specs-----------------------------------------------------------------------------$ 800.00
This is a very nice, rebuilt, ready to go short block.
SOLD---SOLD---'57 passenger car FI air cleaner-------------------------------------------------------------------------------------------------------$ 500.00
SOLD---$7K---I have another '60 (7320) unit complete with distributor and original air cleaner. This unit is restored (Tom Parsons). and never installed. This unit belongs to my '60 big brake fuel car. It's likely that I will not find/purchase the big brake parts missing from my car (5 1/2" wheels, finned drums, and front vented backing plates), so I will sell this complete unit for an additional $5,000.00 to anyone who purchases everything listed above.---SOLD--$7K--
Sold----The '60 FI big brake car is for sale---Sold
SOLD---'65 FI cp is for sale---Please inquire---SOLD
Considering all offers.
George
210 748 4693
geopar@gvtc.com
Last edited by Corvettes by George; 06-23-2015 at 12:08 PM.
07-10-2011, 09:57 AM
#6
Former Vendor
Thread Starter
Passenger car F.I. air cleaner is sold.
Kent Moore manometer is sold.
'59 F.I. car is sold.
'64 F.I. car is sold.
'63 rubber adapter hose (hard/thick) is sold.
'63 air cleaner assembly and "S" tube (bare steel) is sold.
'60 7320 restored unit and air cleaner sold---Have one more 7320 unit and dist.
Lots of requests/interest in parts/pieces so I am working on splitting up and pricing----Would prefer to sell the entire lot as a whole.
Where are the Fuel injection guys?
Kent Moore manometer is sold.
'59 F.I. car is sold.
'64 F.I. car is sold.
'63 rubber adapter hose (hard/thick) is sold.
'63 air cleaner assembly and "S" tube (bare steel) is sold.
'60 7320 restored unit and air cleaner sold---Have one more 7320 unit and dist.
Lots of requests/interest in parts/pieces so I am working on splitting up and pricing----Would prefer to sell the entire lot as a whole.
Where are the Fuel injection guys?
Last edited by Corvettes by George; 08-04-2011 at 08:18 AM.
07-10-2011, 11:15 AM
#8
Former Vendor
Thread Starter
1) above assembly
2) F.I. oil pan
3) Correct fuel pump/lines/filter/bracket
4) Correct alternator and F.I. pulley and bracket
5) Correct F.I. radiator support
6) Correct ignition shielding
These are items that I feel will "sweeten" the deal when I'm trying to sell a complete F.I. assembly, and/or my entire F.I. collection.
If I do break up these items I'll contact you.
Thanks,
George
07-23-2011, 07:05 AM
#11
Former Vendor
Thread Starter
I have one set of repop FI manifolds that are very nice if you would be interested---photos posted above.
G.
08-02-2011, 09:30 AM
#12
Former Vendor
Thread Starter
Updated sold items.
Things are selling nicely.
These are nice units and parts at good prices.
If you're thinking Fuel Injection, jump in here and get what you need.
Thanks,
George
210 748 4693
geopar@gvtc.com
Things are selling nicely.
These are nice units and parts at good prices.
If you're thinking Fuel Injection, jump in here and get what you need.
Thanks,
George
210 748 4693
geopar@gvtc.com
08-04-2011, 08:21 AM
#14
Former Vendor
Thread Starter
I do not have a radio block off plate.
I'll send you photos of the door panels later today.
I'm still planning on taking the train from S.D. and want to see the '58 and your cars.
My NCRS contact (Phillip) would also like to visit. What day next week is good for you.
G
11-28-2011, 11:47 AM
#18
Melting Slicks
Need 57 283hp FI balancer & pulleys...
Do you have the balancer and deep groove bolt-on pulleys for it and the generator?
Any other 57 parts? Also looking for 57 FI shielding.
Any other 57 parts? Also looking for 57 FI shielding.
Last edited by Marks69BB; 11-28-2011 at 11:56 AM.
11-28-2011, 12:30 PM
#20
Melting Slicks
The generator pulley is 3 5/8" in diameter and 1/2" deep groove. It has 6 round spot weld marks around the outside of the keyed flange.
The balancer pulley bolts on and has 3 different sizes of mounting holes (12 total) in a circular pattern. This was the only bolt on balancer pulley in 57; all others were riveted. Part number is 3742991 which is 6 3/4" diameter with a 1/2" inside groove. I also need the balancer if you by chance have both.
These pulleys must be true and not warped.
The balancer pulley bolts on and has 3 different sizes of mounting holes (12 total) in a circular pattern. This was the only bolt on balancer pulley in 57; all others were riveted. Part number is 3742991 which is 6 3/4" diameter with a 1/2" inside groove. I also need the balancer if you by chance have both.
These pulleys must be true and not warped.
