1961 Corvette Borg Warner T10 4 speed transmission - Corvette Forum

Go Back   Corvette Forum > C1 & C2 Corvettes, 1953 - 1967 > C1 & C2 Parts
Log In 
Register FAQ Search Today's Posts Mark Forums Read Vendor Directory
Search

C1 & C2 Parts
C1 & C2 Corvette Performance Parts, Rare NOS and NLA Chevy Parts, Wheels & Tires, Exterior Enhancements, Aftermarket Sponsored by
ProTeam
Corvette

1961 Corvette Borg Warner T10 4 speed transmission

Reply
 
 
 
Thread Tools Search this Thread
Old 05-13-2011, 10:28 PM   #1
Cscowden
Junior Member
 
Member Since: Feb 2011
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1961 Corvette Borg Warner T10 4 speed transmission

Original GM 1961 Borg Warner T10 4 speed close ratio transmission. This unit is correct for 1961 Chevrolet Corvette or Impala. This unit will also fit all 1957-1963 Chevrolet vehicles directly. This is a close ratio unit with no rings on the input shaft. 1st gear ratio is 2.20, 2nd gear ratio is 1.64, 3rd gear ratio is 1.31, and 4th gear is 1.00. This transmission appears to be a nice original unit. The input shaft has 10 splines and the output shaft has 16 splines. The main case has a casting number of T10-1B and is dated B 6 1 (February 6, 1961). The tail shaft has a casting number of T10-7A and is dated 2-10-59. There are no chipped, broken, or damaged gear teeth. When this unit is spun over, it feels excellent with no major slop or issues. It also spun over fine in all 4 gears and shifts with no problems whatsoever. All of the engagement teeth look great with no major wear or damage. The main case is has no cracked or broken ears and no welds or damage. There are no stripped holes or heli-coils in the main case. The tail shaft is in good shape with no cracks, damage, or welds. There are no stripped holes or heli-coils in the tail shaft. This unit is pretty clean and will need a light cleaning up before being installed. This unit is 100% matching numbers front to back! These original early close ratio Borg Warner T10's are becoming extremely hard to find. Asking $1000

This trans turns, shifts, and feels real good. I do think it could use new seals.

Please feel free to message me any and all questions regarding this transmission. I have several pics that I can send as well.

Chris
214-733-2433

Last edited by Cscowden; 05-13-2011 at 10:29 PM. Reason: spelling
Cscowden is offline   Reply With Quote
Old 07-28-2011, 05:00 PM   #2
Cscowden
Junior Member
 
Member Since: Feb 2011
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Sold
Cscowden is offline   Reply With Quote
Go Back   Corvette Forum > C1 & C2 Corvettes, 1953 - 1967 > C1 & C2 Parts
Reload this Page 1961 Corvette Borg Warner T10 4 speed transmission
 
 
Reply


Similar Threads
Thread Thread Starter Forum Replies Last Post
1961 Borg Warner 4 speed trans jv04 C1 & C2 Parts 0 04-07-2016 08:49 PM
Trans for '05 - C5 case, 6060 guts, 9310 30 spline RX-Ben C6 Parts for Sale/Wanted 7 11-02-2015 10:02 AM
1961 Borg Warner T 10 trans for sale sixty5nfw C1 & C2 Parts 7 10-08-2015 12:11 AM
1961 T10 Close Ratio Transmission For Sale BB64VETTE C1 & C2 Parts 3 09-02-2014 01:31 PM
Borg Warner identification vert64 C1 & C2 Corvettes 3 01-30-2008 01:51 PM


Tags
1961, 61, borg, bw, close, corvette, gear, input, parts, ratio, ring, shaft, speed, t10, trans, transmission, warner

Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump



All times are GMT -4. The time now is 10:11 AM.