parting out 64 wreck
09-29-2014, 10:23 PM
#1
Former Vendor
Thread Starter
Member Since: May 2013
Location: Thorold Ontario
Posts: 3,297
Likes: 0
Received 17 Likes
on
17 Posts
parting out 64 wreck
Please see pics, couple prices below, let me know what else you need and i'll price it.
Cluster with gauges $700
Rear bumpers $800
Cluster with gauges $700
Rear bumpers $800
09-29-2014, 10:36 PM
#2
Safety Car
Looks like there's not much more that's useable than the rear bumpers and the cluster! Train: 1, Corvette: 0
09-30-2014, 04:57 AM
#4
Advanced
Member Since: Feb 2014
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
parts
Looking for parking brake assy ,the one in the car mounted to dash also front cable if possible ,How much also seat belts if there black 203 592-9744 or email gdegeorge@sikorsky.com shipping is CT 06770 1021
Andrew mt rd Naugatuck Ct. 06770
Andrew mt rd Naugatuck Ct. 06770
09-30-2014, 07:54 AM
#6
Burning Brakes
Ouch
Always sad to see something like this
. Can only hope that the driver was OK, or not in the car at the time. I am looking for a coupe, but this is more than a project. A friend rebuilt a 67 from two cars that were destroyed like this, but it took a long time and effort.
. Can only hope that the driver was OK, or not in the car at the time. I am looking for a coupe, but this is more than a project. A friend rebuilt a 67 from two cars that were destroyed like this, but it took a long time and effort.
09-30-2014, 09:42 AM
#7
Former Vendor
Thread Starter
Member Since: May 2013
Location: Thorold Ontario
Posts: 3,297
Likes: 0
Received 17 Likes
on
17 Posts
Always sad to see something like this. Can only hope that the driver was OK, or not in the car at the time. I am looking for a coupe, but this is more than a project. A friend rebuilt a 67 from two cars that were destroyed like this, but it took a long time and effort.
. Can only hope that the driver was OK, or not in the car at the time. I am looking for a coupe, but this is more than a project. A friend rebuilt a 67 from two cars that were destroyed like this, but it took a long time and effort.
09-30-2014, 10:52 AM
#9
09-30-2014, 01:11 PM
#10
Safety Car
Im interested in the intake, filler tube, exhaust manifolds, balancer(if it is a high perf finned unit), alternator bracket, and pulleys.
Also, it looks to have an early unit master cylinder. If that is the one that is correct for a 63 as well, then i am interested in it.
One more thing...if the lower portion of the driver's drip rail is in good shape, I need it. Someone chopped the one on my 63 off at the lower portion for some reason. Id rather section a piece in rather than cut up a new 500.00 unit just for the small piece i need. I can send pics.
Also, it looks to have an early unit master cylinder. If that is the one that is correct for a 63 as well, then i am interested in it.
One more thing...if the lower portion of the driver's drip rail is in good shape, I need it. Someone chopped the one on my 63 off at the lower portion for some reason. Id rather section a piece in rather than cut up a new 500.00 unit just for the small piece i need. I can send pics.
09-30-2014, 01:31 PM
#11
Instructor
How much for the damaged headlight buckets complete and motors? Also how much for the windshield wiper motor and radio antenna complete. deriley47@gmail.com or 308-380-1794.
Thanks, Dan
Thanks, Dan
09-30-2014, 01:33 PM
#12
Team Owner
If those valve covers do NOT have the casting flaw and didn't get boogered up then let me know what you want for them. That mess is a crying shame for sure!
09-30-2014, 08:42 PM
#16
Advanced
Member Since: Feb 2014
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Parking brake assy
Hello, asked about parking brake this morning , how are the rear bumpers ? twisted ? If there straight work me up a package price . I have the brackets but need bumpers thanks Gregg gdegeorge@sikorsky.com
10-01-2014, 07:48 AM
#19
Advanced
Spare Jack/Handle
