WANTED: 427 ci long block
#1
Instructor
Thread Starter
WANTED: 427 ci long block
Looking for a 2-bolt main block with 3904351 casting with December '66 date or earlier.
Please PM me if you have or know of anyone who might have this.
Thanks.
Please PM me if you have or know of anyone who might have this.
Thanks.
Last edited by JCPerformance; 01-04-2015 at 07:56 PM.
#2
Former Vendor
I have a true 4 bolt 351 block that is dated J 12 6 (Oct. 12, 1966).
Std. bore, over the counter block (never stamped pad---but the deck has been lightly surfaced), used as a drag engine, low miles.
This is a complete short block with cast pop ups, 6223 steel crank, eagle rods, roller cam, etc.
Also have 392 aluminum and 391 cast iron sq. port heads if needed.
Also have original oil pans, timing covers, etc..
Will sell bare block.
Thanks,
George
geopar@gvtc.com
210 748 4693
Std. bore, over the counter block (never stamped pad---but the deck has been lightly surfaced), used as a drag engine, low miles.
This is a complete short block with cast pop ups, 6223 steel crank, eagle rods, roller cam, etc.
Also have 392 aluminum and 391 cast iron sq. port heads if needed.
Also have original oil pans, timing covers, etc..
Will sell bare block.
Thanks,
George
geopar@gvtc.com
210 748 4693
#4
Safety Car
Here's a complete engine. You could always sell the parts you don't need. I know the seller to be a stand-up guy.
https://www.corvetteforum.com/forums...-for-sale.html
https://www.corvetteforum.com/forums...-for-sale.html
#5
Instructor
Thread Starter
Here's a complete engine. You could always sell the parts you don't need. I know the seller to be a stand-up guy.
https://www.corvetteforum.com/forums...-for-sale.html
https://www.corvetteforum.com/forums...-for-sale.html
I appreciate your response, but I'm pretty sure 435hp cars were 4 bolt mains; I was looking for a 2-bolt main. Maybe if the heads matched, I'd consider it,
but I think I'll keep looking for now at that price. Thank you though.
#6
Safety Car