F/S Points ! Good ones ! Echlin HD Marine aplication
08-18-2015, 11:20 PM
#21
10-03-2015, 05:20 PM
#22
71scgc humour LMAO
Below is a forum members response I rec'd recently after he posted "I'll take it !" to another item I have listed.
Jerry,
Thank you but if you require a money order I will pass. It takes time, gas and is a hassle to mess with filling it out at the post office to mail it in the same trip.
I guess my time, gas and effort to pack and ship doesn't count ?!!
Jerry,
Thank you but if you require a money order I will pass. It takes time, gas and is a hassle to mess with filling it out at the post office to mail it in the same trip.
I guess my time, gas and effort to pack and ship doesn't count ?!!
You got me with your note with the MO - "though it has been an epic and arduous task to get the MO".
I thought you were serious - LMAO !!
Thank you for the counterpoint humour
I mailed off your ignition set yesterday - you should receive it mid-week Oct 12 - 16
Jerry
12-09-2015, 04:00 PM
#24
Through a lot of searching I have come up with some heavy duty marine application Echlin ignition tune-up sets.
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
12-09-2015, 09:33 PM
#25
Point Set
Hi, can you please tell me what payment method you will except?
Thanks, Nelson
Email: briercreekboy@aol.com
Thanks, Nelson
Email: briercreekboy@aol.com
12-10-2015, 12:45 AM
#26
Hi, can you please tell me what payment method you will except?
Thanks, Nelson
Email: briercreekboy@aol.com
Thanks, Nelson
Email: briercreekboy@aol.com
Thank you for your interest
12-10-2015, 08:31 AM
#27
Drifting
Member Since: Apr 2014
Location: montague michigan
Posts: 1,744
Received 77 Likes
on
61 Posts
C2 of Year Finalist (stock) 2019
Through a lot of searching I have come up with some heavy duty marine application Echlin ignition tune-up sets.
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
12-10-2015, 10:45 AM
#28
12-30-2015, 04:28 PM
#31
Slow mail ?!
FYI anybody that has recently sent payment for the points / ignition sets.
I just received 20 round Troy's MO - it took OVER 2 WEEKS to get from Michigan to Toronto !
I just received 20 round Troy's MO - it took OVER 2 WEEKS to get from Michigan to Toronto !
12-31-2015, 07:34 AM
#32
Burning Brakes
Member Since: Apr 2009
Location: Somewhere North of The 49th Parallel Ontario
Posts: 1,150
Received 151 Likes
on
92 Posts
Through a lot of searching I have come up with some heavy duty marine application Echlin ignition tune-up sets.
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $6)
FYI : I have 10 of these ignition sets remaining
01-02-2016, 07:43 AM
#34
Burning Brakes
Good stuff
and I had to put it away till spring.
The following users liked this post:
QIK59 (01-03-2016)
01-03-2016, 10:51 PM
#35
Thank you for the "plug" too !
FYI - I am now down to the last 4 kits.
07-09-2016, 10:38 AM
#36
Through a lot of searching I have come up with some heavy duty marine application Echlin ignition tune-up sets.
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $7)
Payment by USPS money order only - sorry to those who think it's to much work
FYI : I have 6 of these ignition sets remaining
Marine grade components are designed and manufactured for extended high rpm use under heavy load.
These were made in the USA back when things were actually manufactured (start to finish) in the USA.
These are a premium quality points and condenser set along with the long discontinued pre-emission distributor rotor with the long electrode.
These points have the bakelite rubbing block that absorbs and holds lubricant to maintain point gap and dwell not like the soft plastic rubbing blocks that virtually all manufacturers are currently supplying including DELCO.
Typically Echlin points last 10-15 years as the rubbing blocks and contacts do not deteriorate.
The extended electrode rotor ensures maximum voltage and current transfer for performance applications.
I am selling these kits for the same price as a set of off-shore replacement points would cost you : $25 plus postage (postage to the lower 48 is $7)
Payment by USPS money order only - sorry to those who think it's to much work
FYI : I have 6 of these ignition sets remaining
07-09-2016, 03:07 PM
#38
Race Director
Member Since: Mar 2009
Location: Canada's capital
Posts: 19,777
Received 4,583 Likes
on
2,157 Posts
2020 Corvette of the Year Finalist (appearance mods)
C1 of Year Finalist (appearance mods) 2019
Any more sets available? ......and, do you take paypal?
thanks.
thanks.
07-11-2016, 10:21 AM
#39
FYI postage in Canada is horrendous :
Reg Parcel to BC - no insce $16 Cdn = $12 US + $25 for the tune up kit
Express Post (includes insce) $20 Cdn = $15 US + $25 for the tune up kit.
Let me know if you are okay with this and I'll PM you my address
Payment in US $ only please - thanks
07-11-2016, 10:29 AM
#40