Wilwood Aluminum Master Cylinder #260-4894
10-07-2015, 05:14 AM
#1
Pro
Thread Starter
Wilwood Aluminum Master Cylinder #260-4894
Aluminum, Natural, 1.0625 in. Bore, Universal.
Installed on my '58 restomod but never used on the road. I could not bleed the brakes so as a last resort I bought a second one and then had the same problem. I finally found that one of the rear brake line fittings was not sealing properly (stupid installer...me).
I'll include a Wilwood disc brake proportioning valve #260-8419, NIB.
$80 for both.
Installed on my '58 restomod but never used on the road. I could not bleed the brakes so as a last resort I bought a second one and then had the same problem. I finally found that one of the rear brake line fittings was not sealing properly (stupid installer...me).
I'll include a Wilwood disc brake proportioning valve #260-8419, NIB.
$80 for both.
03-19-2016, 04:19 PM
#2
Racer
Aluminum, Natural, 1.0625 in. Bore, Universal.
Installed on my '58 restomod but never used on the road. I could not bleed the brakes so as a last resort I bought a second one and then had the same problem. I finally found that one of the rear brake line fittings was not sealing properly (stupid installer...me).
I'll include a Wilwood disc brake proportioning valve #260-8419, NIB.
$80 for both.
Installed on my '58 restomod but never used on the road. I could not bleed the brakes so as a last resort I bought a second one and then had the same problem. I finally found that one of the rear brake line fittings was not sealing properly (stupid installer...me).
I'll include a Wilwood disc brake proportioning valve #260-8419, NIB.
$80 for both.