FS - C2 parts, can deliver to NCRS event at Lakeland, Fla
#1
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Richmond Kentucky
Posts: 5,719
Received 1,240 Likes
on
457 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C2 of the Year Winner - Modified
2021 C1 of the Year Winner - Modified
2020 Corvette of the Year (stock)
C2 of Year Winner (stock) 2019
2017 C1 of the Year Finalist
FS - C2 parts, can deliver to NCRS event at Lakeland, Fla
A friend of mine has generously offered to deliver to the NCRS event at Lakeland any of these parts for me. Parts must be prepaid. Obviously he can't bring all of these parts but any that have been paid for he can deliver for me. PM or email me for pics or additional details.
Five original, survivor unrestored 64 KH knockoffs, adapters, spinners and original 6.70X15 WW spare tire; $8500
One restored original 63-64 KH knockoff wheel with new repro Firestone 6.70X15 BW tire, no hardware; $1500
New, complete silver interior for 64 coupe, Al Knoch vinyl seat covers, ACC foam backed carpet, kick panels, center cushion cover,, NICE used repro door panels with hardware, $950
63-64 fiberglass, reproduction (not sure of MFR, but perhaps Shemersheim or ACI) inner fender, side lower fender with vents, parking light panel, (ALL for passenger side), front lower valance panel; $600 for all
One 15X7 Appliance Torque Thrust D (same as American Racing from the 60's) wheel, aluminum, 4.75 bolt circle, 3.75 back spacing; $125
Two MINT original American Racing 15X6 Torque Thrust D magnesium wheels, 4.75 BC, 3.75 back spacing; $1000 pr.
One NOS American Racing 15X6 Torque Thrust D magnesium wheel, 4.75 BC, 3.75 back spacing; $650
Two 15x10 American Racing Torque Thrust D magnesium wheels, 4.75 BC, 3.75 back spacing, crack checked OK, currently powder coated silver but PC can be chemically removed without damaging wheel, no damage and no pitting, VERY NICE wheels; $1500 pr.
One passenger side OK Kustom header for 63-79 BB Corvette, nice, no damage, no rust; $800
One driver side OK Kustom side pipe for 63-79 Corvette, BB or SB, VERY nice; $200
Custom stainless steel exhaust system with small round mufflers, exit in front of rear wheel, and almost new Headman ceramic coated headers for 63-67 small block, was used on show car; $800
Set of Stahl road race headers (and adapter plates for heads) for side exhaust 63-82 Corvette small block, 1 7/8 primaries into 3.5 inch collectors, VERY early set of Stahl headers, nice condition; $750
Nice finned 8 inch balancer for 62-65 Sp Hi Perf solid lifter engines; $350
Reproduction Bill Thomas L-88 headers and side pipes for 63-79 BB Corvette, 321 stainless steel, made using an original set as a guide; $4500
Ecklers fiber glass headlight bucket kit for mounting headlights in grille for 63-67, new; $75
Thanks in advance for your consideration. Everyone enjoy the show.
Rex
email J56fuelie@yahoo.com
Five original, survivor unrestored 64 KH knockoffs, adapters, spinners and original 6.70X15 WW spare tire; $8500
One restored original 63-64 KH knockoff wheel with new repro Firestone 6.70X15 BW tire, no hardware; $1500
New, complete silver interior for 64 coupe, Al Knoch vinyl seat covers, ACC foam backed carpet, kick panels, center cushion cover,, NICE used repro door panels with hardware, $950
63-64 fiberglass, reproduction (not sure of MFR, but perhaps Shemersheim or ACI) inner fender, side lower fender with vents, parking light panel, (ALL for passenger side), front lower valance panel; $600 for all
One 15X7 Appliance Torque Thrust D (same as American Racing from the 60's) wheel, aluminum, 4.75 bolt circle, 3.75 back spacing; $125
Two MINT original American Racing 15X6 Torque Thrust D magnesium wheels, 4.75 BC, 3.75 back spacing; $1000 pr.
One NOS American Racing 15X6 Torque Thrust D magnesium wheel, 4.75 BC, 3.75 back spacing; $650
Two 15x10 American Racing Torque Thrust D magnesium wheels, 4.75 BC, 3.75 back spacing, crack checked OK, currently powder coated silver but PC can be chemically removed without damaging wheel, no damage and no pitting, VERY NICE wheels; $1500 pr.
One passenger side OK Kustom header for 63-79 BB Corvette, nice, no damage, no rust; $800
One driver side OK Kustom side pipe for 63-79 Corvette, BB or SB, VERY nice; $200
Custom stainless steel exhaust system with small round mufflers, exit in front of rear wheel, and almost new Headman ceramic coated headers for 63-67 small block, was used on show car; $800
Set of Stahl road race headers (and adapter plates for heads) for side exhaust 63-82 Corvette small block, 1 7/8 primaries into 3.5 inch collectors, VERY early set of Stahl headers, nice condition; $750
Nice finned 8 inch balancer for 62-65 Sp Hi Perf solid lifter engines; $350
Reproduction Bill Thomas L-88 headers and side pipes for 63-79 BB Corvette, 321 stainless steel, made using an original set as a guide; $4500
Ecklers fiber glass headlight bucket kit for mounting headlights in grille for 63-67, new; $75
Thanks in advance for your consideration. Everyone enjoy the show.
Rex
email J56fuelie@yahoo.com
#3
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Richmond Kentucky
Posts: 5,719
Received 1,240 Likes
on
457 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C2 of the Year Winner - Modified
2021 C1 of the Year Winner - Modified
2020 Corvette of the Year (stock)
C2 of Year Winner (stock) 2019
2017 C1 of the Year Finalist
Weekend bump
#4
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Richmond Kentucky
Posts: 5,719
Received 1,240 Likes
on
457 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C2 of the Year Winner - Modified
2021 C1 of the Year Winner - Modified
2020 Corvette of the Year (stock)
C2 of Year Winner (stock) 2019
2017 C1 of the Year Finalist
To the top