act592

I have a 1966 427 / 425 engine that is std. bore that still has some of the crosshatch in the std. cylinders, std. 11 to 1 pistons, steel crankshaft, correct connecting rods, timing cover, balancer, water pump, and still has the nylon timing gear. The short block is still assembled. The casting date on the block is C-8-6. The pad on the block has T0407IP and no VIN. It has not been decked. The heads are C-15-6 and they are disassembled. They have not had any porting done, are not damaged or much decking done if any. The guides are tight and the valves appear to be the originals. All the original head bolts, rockers, guide plates and pushrods are there also. There isn't an intake, oil pan or valve covers. 3869942 Block 3873858 Heads

$9000.00 OBO

midvette6067

I assume T0407IP and no VIN = the orig. Tonawanda made stamp, and the engine was sold over the service counter?

dconlon19

Check your pm

dconlon19

act 592.......are you out there . helloooooo

dconlon19

Ttt

dconlon19

ttt

dconlon19

Ttt