F/S: Half-shaft U-bolts & Spindle flange bolts
#1
Burning Brakes
Thread Starter
F/S: Half-shaft U-bolts & Spindle flange bolts
For Sale: For the restoration crowd, or clean part crowd, I have a set of 4 U-bolts & nuts/washers for the inboard (stub axle) side of a half-shaft, and 8 of the bolts (no washers though) for the outboard (spindle flange) side of the half-shaft. I believe the U-bolts and bolts to be GM and are for the small-block applications, not sure about the nuts and washers. Parts are clean and rust-free (off a NorCalif C2). The U-bolts, washers and nuts have been painted sometime in the past with a cast iron paint (like high heat VHT or similar), which has preserved them some, but finish is scratched up now. The spindle flange bolts have the double-circle head, have a blackish coating (like the factory undercoating), and about half of them show some signs of wrench slippage (but no blood that I can see, LOL). They are 1" underhead length. I believe these are also used for brake caliper retaining bolts as well. If any of you sharp-eyed Vette experts notice a misrepresentation on my part, please chime in and correct me so we all can know. Asking $10 shipped in the lower 48 States for the 8 spindle flange bolts, and $20 shipped in the lower 48 States for the four U-bolts. If someone wants all the fasteners, I'd do $25. First one to PM they want the stuff gets it, and thanks for looking!
John A, 67L88Vette
John A, 67L88Vette
Last edited by 67L88Vette; 07-15-2016 at 09:07 PM. Reason: fix pictures
#3
Burning Brakes
Thread Starter
Dragging this thread from the past, not even raising my ask LOL ... Nice set of original GM NorCal, non-rusty small-block half-shaft u-bolts with nuts and washers here ... Also the 8 bolts are still available as well ... Thanks for looking, again.
John A, 67L88Vette
John A, 67L88Vette
#4
Racer
You have a PM
SWC Tim
SWC Tim