WTS-'63-67 Corvette Parts
02-23-2003, 07:23 PM
#1
Instructor
Thread Starter
Member Since: Feb 2003
Location: Hollywood Florida
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
WTS-'63-67 Corvette Parts
My brother had a '63 and I have a '65 (that I bought from the original owner in '66) and a '67. Over the years, I've collected alot more parts than I could possibly use. Anyway, I need the $ and my daughter wants a '78 Pace Car :eek: so I've got alot of parts to sell.
I have too many fasteners to list, (does anybody need a gross of clock clips), but here are some of the instruments that I wish to sell:
1. '63 Clock. Factory-dated "Feb 63". It's complete, except for a second hand (if there was one to begin with?), the face is in very good "survivor" condition and does not appear to need silkscreen. The polished cone is in excellent condition also, as are the needles. The lens has a 1-inch crack. The clock was repaired for me years ago and worked fine at that time. It's been stored in an air-conditioned closet since that time.
2. '63 Battery Gauge. Visually in very good "survivor" condition, but the needle is missing.
3. '63 Fuel Gauge (face only). In very good "survivor" condition.
4. '63-'67 Storage Compartment Cover. Black and in excellent condition. Came out of a '67 with Jacking Instructions and Differential Warning.
5. '64-'66 Seatbelt Hardware. Buckles, etc.
6. '65 Small Block Crome Air Cleaner Cover. I think it may have other applications which I'm still checking on.
7. '65-'67 Fuel Gauge (face only). NOS.
8. '65-'67 Battery Gauge (face only).
9. '65-'67 Clock. The face is in excellent "survivor" condition, and does not appear to need silkscreen. The needles are excellent.
10. '65-67 Speedometer; needs calibration and silk-screen.
11. '65-67 Fuel Gauge. Visually in very good "survivor" condition, but may need calibration or repair.
12. '65-'66 Water Temperature Gauge. Visually in fair "survivor" condition.
13. '67 Water Temperature Gauge. Visually in fair/good "survivor" condition.
14. '67-only Steering Wheel, plastic wood grain. In excellent condition.
Contact me for pictures and more information on the parts.
Thanks,
Ed :auto:
[Modified by vette_addict, 12:27 AM 2/24/2003]
I have too many fasteners to list, (does anybody need a gross of clock clips), but here are some of the instruments that I wish to sell:
1. '63 Clock. Factory-dated "Feb 63". It's complete, except for a second hand (if there was one to begin with?), the face is in very good "survivor" condition and does not appear to need silkscreen. The polished cone is in excellent condition also, as are the needles. The lens has a 1-inch crack. The clock was repaired for me years ago and worked fine at that time. It's been stored in an air-conditioned closet since that time.
2. '63 Battery Gauge. Visually in very good "survivor" condition, but the needle is missing.
3. '63 Fuel Gauge (face only). In very good "survivor" condition.
4. '63-'67 Storage Compartment Cover. Black and in excellent condition. Came out of a '67 with Jacking Instructions and Differential Warning.
5. '64-'66 Seatbelt Hardware. Buckles, etc.
6. '65 Small Block Crome Air Cleaner Cover. I think it may have other applications which I'm still checking on.
7. '65-'67 Fuel Gauge (face only). NOS.
8. '65-'67 Battery Gauge (face only).
9. '65-'67 Clock. The face is in excellent "survivor" condition, and does not appear to need silkscreen. The needles are excellent.
10. '65-67 Speedometer; needs calibration and silk-screen.
11. '65-67 Fuel Gauge. Visually in very good "survivor" condition, but may need calibration or repair.
12. '65-'66 Water Temperature Gauge. Visually in fair "survivor" condition.
13. '67 Water Temperature Gauge. Visually in fair/good "survivor" condition.
14. '67-only Steering Wheel, plastic wood grain. In excellent condition.
Contact me for pictures and more information on the parts.
Thanks,
Ed :auto:
[Modified by vette_addict, 12:27 AM 2/24/2003]
02-26-2003, 06:49 PM
#3
Le Mans Master
Re: WTS-'63-67 Corvette Parts (vette_addict)
Heh Ed...............You got Email.............