1963 Corvette Coupe, automatic, project, only $20,800
07-20-2003, 01:27 PM
#1
Instructor
Thread Starter
1963 Corvette Coupe, automatic, project, only $20,800
I have decide to sell my '63. It has a new black interior, good tires, new battery, fuel pump and sending unit. The body is in nice shape, the body seams are quite even, and I doubt it has ever been slammed. I can tell there is some minor body work done previously on the nose and on the left rear behind the tire. The headlight motors do work and it looks like the original grill is still intact. The rear bumpers are like new and the front ones are in good shape without rust or pits. I can't tell if the engine is original, there seems to be too many numbers on the pad; however, it is a 327 as evidenced by the can type oil filter. All the stainless is in great shape. Someone put side pipes on the car and I can tell they are the 2 1/2" size. I call this a project car because you will need to do some wiring and I can't get the engine to start although it seems to want to kick over. I can offer the car for $20,250. Photos did not attach, email me for photos. [IMG][/IMG]
[Modified by fcabarle, 9:45 PM 7/20/2003]
[Modified by fcabarle, 9:45 PM 7/20/2003]
07-20-2003, 03:28 PM
#2
Team Owner
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (fcabarle)
Welcome to the Forum..I see you clicked the image tags..but no pic. You need to upload pics to a "host" website then you can place pics here..there is a help section here where they can assist you. When you get all that, click the image keys, and place your pic in between the image keys! :seeya
[img]your[/img]
[img]your[/img]
07-22-2003, 02:44 AM
#3
Safety Car
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (fcabarle)
Send pics to me...I'd like to see this SWC, I'll host them for you also.
Pics received here they are:
[Modified by 90EXPVette, 6:54 AM 7/22/2003]
Pics received here they are:
[Modified by 90EXPVette, 6:54 AM 7/22/2003]
07-23-2003, 03:22 PM
#4
Melting Slicks
Member Since: Mar 2003
Location: Indianapolis IN
Posts: 3,472
Received 444 Likes
on
322 Posts
Finalist 2020 C4 of the Year - Unmodified
C4 of Year Finalist (stock) 2019
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (fcabarle)
You have both IM and email.
Dave
Dave
07-31-2003, 04:14 PM
#5
Instructor
Thread Starter
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (fcabarle)
Well, I finally got it running good, it had a burnt valve. The sending unit was clogged, fuel pump did not work and the carb was professionaly rebuilt. Now if someone can only wave a magic wand and get the electrics to work. The wiper, heater control and turn signal don't work and the radio is scratchy. I'm starting to have second thoughts about selling this car. Anyone in the NJ area profecient with the wiring in the car? :hurray:
07-31-2003, 05:49 PM
#6
Melting Slicks
Member Since: Mar 2003
Location: Indianapolis IN
Posts: 3,472
Received 444 Likes
on
322 Posts
Finalist 2020 C4 of the Year - Unmodified
C4 of Year Finalist (stock) 2019
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (fcabarle)
I will be out your way in September...electrical and electronics are my livelyhood. Be happy to help you out then if you like.
I never heard back from you after I emailed and IM'd you....kinda figured you might have changed your mind on selling. :sad:
If you'd like my help, OR you decide you DO want to sell, PLEASE let me know.
Dave
I never heard back from you after I emailed and IM'd you....kinda figured you might have changed your mind on selling. :sad:
If you'd like my help, OR you decide you DO want to sell, PLEASE let me know.
Dave
08-02-2003, 07:44 AM
#7
Instructor
Thread Starter
Re: 1963 Corvette Coupe, automatic, project, only $20,800 (73L48 Dave)
Hi Dave: Thanks for your offer. Please bring electrical test equipment and plenty of wire! :hurray:
