TOM B1

I have a 69 vette that I took out the wiring harness, it was junk.
I cant find the correct wire diagram for the ignition switch.
The colors on the ignition switch plug are, White, Red, Green, Blue, Brown, Orange.
In my 69 assembly manual the ignition switch diagram has a purple pink, red, green and so on, but not the right colors.
Anyone run into this, or have the right wiring diagram.
Please help.

MakoShark72

Try here..a great deal, its FREE!1 I got one for my 72.

http://forums.corvetteforum.com/c3-g...or-anyone.html

Rob

TOM B1

I sent him a PM but dont know if he is still doing it.
Someone had to have the same problem with there 69.

Brewmeistergi

Looking at my 69 wiring diagram, it shows a pink wire in a white connector in the upper left terminal position (looking at the open end of the connector), a purple w/a white stripe in the lower left position and a brown wire in the upper right position. There seems to be a separate black connector that only has a red wire in the middle right position, the other positions are blank.

Hope this helps.