1976 Widebody Frame Off By A Newbie
#41
Instructor
Thread Starter
update
I have currently got the chassis rolling with everything back in except the engine, trans and exhaust system. After this I will be ready to reinstall the body and start on the fiberglass. It has been a long two and a half years since I started but I am enjoying the process. This week I am waiting on my engine to come back from the builder stroked out as a 383 with about 400hp. I will take some pics when i get it back in the car.
#43
Melting Slicks
You are lucky indeed!
Lucky man who buys a house and gets a Corvette too!
You may know this already, but there is a very active Corvette Club with over 300 members, Greater New Orleans Corvette Club, in your area. You certainly do not look like you need any help, but you might enjoy the camaraderie!!!
You may know this already, but there is a very active Corvette Club with over 300 members, Greater New Orleans Corvette Club, in your area. You certainly do not look like you need any help, but you might enjoy the camaraderie!!!
#46
Instructor
Thread Starter
You are right. I am getting ready for a move out of state and trying to get the car ready for transport and I got ahead of myself. Thanks for pointing it out
I am a first timer at this restoration stuff and welcome any comments or questions on things you guys and gals see me doing. I am doing a lot of research before I do most of these steps but sometimes like this I miss something. thanks again.
I am a first timer at this restoration stuff and welcome any comments or questions on things you guys and gals see me doing. I am doing a lot of research before I do most of these steps but sometimes like this I miss something. thanks again.
Last edited by newvetman; 04-26-2012 at 11:21 PM. Reason: need to add more
#47
Burning Brakes
widebody help
go to the makoshark2.com forum This is where most of the widebody guys hang out at. Lots of info here. Also click on the forums tag and you will see a widebody forum, greenwood forum and others. Good luck with your project also. Heres pics of my 77 widebody.
http://daytimedaytonapics.shutterfly.com/#n_3
Richard
http://daytimedaytonapics.shutterfly.com/#n_3
Richard
#60
Instructor
Thread Starter